My Car Wont Start! Help Me! In Huge Ruuushhh!!!!!!!!

FiveOhhStang · Jan 13, 2004

this has happened before, but I move the positive cable and sometimes it starts...i got it replace and never again till today.. I decided to move a few wires/looms around to hide a few things and clean the bay up without major work...I moved the 'salt and pepper' modules by the intake below...and now MY CAR WONT START!
I TURN OVER THE KEY AND ENGAGE THE CLUTCH....ALL I HEAR IS THE DRONE FROM THE FUEL PUMP, AND THE NORMAL TURN OVER THE KEY STUFF THEN NOTHING! WHATS WRONG!? HOW CAN I TROUBLE SHOOT THIS AT HOME? WHAT SHOULD I CHECK?
-Nick

FiveOhhStang · Jan 13, 2004

where should I start looking? its not turning over...just i turn the key hear the drone of the fuel pump, and thats that....help!

mike keirstead · Jan 13, 2004

Check the neutral safety switch. It is located under the dash. Its white and it looks like a cross. When the clutch pedal is to the floor the top of the clutch pedal (in the dash) hits the switch and allows the car to start. The switch can be reset.

FiveOhhStang · Jan 13, 2004

I dont see it...where is it? where can I reset it? im a pretty tall medium built man...its hard at **** to get under there...and its pretty dark now...I gotta get this running, HELP! just keeps making the noises like the pump...
-Nick

mike keirstead · Jan 13, 2004

The pump is supposed to make noises. Its priming. I am 6'4 225 pounds. So i know what you mean. You will need a flashlight. It directly above the clutch pedal. Look underneath and see where the clutch pedal goes up into the dash. Its a little white piece of plastic. The clutch pedal depresses it. Pull the tab OUT. The clutch pedal will reset when you put the clutch to the floor.

This may not be your problem though. Check your starter wires on the passenger side of the car under the headers. Make sure they are tight.

If you cant fix it.......try bumping starting it. That works for me.

FiveOhhStang · Jan 13, 2004

Bumpity Bump...TTT... Im going to get try to reset the clutch... and check the starter wires, yeah, I hear the priming of the pump, but thats all..not turn overs or nothing. HELP!

mike keirstead · Jan 13, 2004

Try Bump Starting It

mike keirstead · Jan 13, 2004

What wires did you mess with. It sounds like a battery problem. Check your grounds. Check your power. It could be alot of stuff.

FiveOhhStang · Jan 13, 2004

The clutch reset....i see a silver box with a white tube sticking out that appears to hit the firewall when the clutch is pressed in. at the end of the tube is a small squarish thingy...is this it? i tried pulling it out, it just clicked but didnt extend...PLEASE HELP! as for the starter I dont see it, I know its location but its lost somewhere down there.
I dont hear a click from the starter either if it is suppose too that is. I have a feeling its part of the ignition/starter system like the coil...dont know if that would caus this problem.
-Nick

FiveOhhStang · Jan 13, 2004

power cable just got replaced not too long ago.. about my grounds...just the one to the block, or what other ones?
-Nick

bgjohnson · Jan 13, 2004

just get it goin 5-10 mile an hour and pop the clutch out, if you really need it running now.

mike keirstead · Jan 13, 2004

Put it neutral....push it down the road...jump in....shove in the clutch put it 2nd and dump the clutch.

FiveOhhStang · Jan 14, 2004

Its too late for right now, I just need it running for college tommarow, and i still have HW...The silenoid has power on both sides, im gonna jack it and take a closer look at the starter...Stay with my guys, any other help?
-Nick

mike keirstead · Jan 14, 2004

Man we arnt there. I suggest you stop running inside to type on your computer and try fix the problem. It could be anything.

Clean the battery posts and insides of the clamps. Follow all your grounds. Check the coil grounds.

FiveOhhStang · Jan 14, 2004

heh...well UPDATE: coil ground is good...and its getting power when the ignition is turned on...(checking via elec. tester.) I only see a ground going to the starter...and thats working....is there any major things i can check...to narrows down where the problem is?
-Nick

mike keirstead · Jan 14, 2004

Did you clean the terminals

FiveOhhStang · Jan 14, 2004

there super clean but ill go do it for safe's sake, im not a huge mechanic..i know simple things, the bigest thing ive done was swap a fuel pump...i can fix simple things, and know basics...so i just need help, i understang your not here, but i figured someone can help me out.
-Nick

mike keirstead · Jan 14, 2004

Well, I dont know. Check your fuse panel for a burnt fuse i guess.

FiveOhhStang · Jan 14, 2004

well, ive gotta get ready for sleep, do my HW, and figure out what im doing tommarow to get to school, hopefully ill figure something out, i cleaned the posts and cables...can anyone else post if they have suggestions? if the coil is bad would this give me my problem? i did take off then put back on the wire harness that goes into the distributor but nothing...nite folks, and thank you very much for your help so far mike, and what a beauty for a stang you've got!!
-Nick

mike keirstead · Jan 14, 2004

Thanks...get back to me tommorow.

Your coil would not be your problem. Something is not getting power somewhere. What exactly did you do?

My Car Wont Start! Help Me! In Huge Ruuushhh!!!!!!!!

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency