My flow-tech headers leak...

Pokageek · Oct 23, 2005

so I plan on getting better quality when I get my aftermarket heads. With the Ford racing headers not fit any of the aftermarkert heads?

SMOKEDYA · Oct 24, 2005

thats why!!!!! THERE FLO TECH crapola !!!!! The ford headers are awsome, i have a set of bassani's equal lenth that are jet hot coated i will sell you. To stop the leaking flow's i got a set or spector gaskets that were extra thick and that stoped the leak as well as going with lock tight on the bolts. send me a P.M with your email and i can give you a picture of the bassani's and the picture of the gasket package along with the part number i would post it here but i cant figure out how to do so now that i switched internet carriers. peace

john

haulbalz · Oct 24, 2005

How Much Are You Selling Them For?

Pokageek · Oct 24, 2005

The car was tricking me. I had the h-pipe welded today to find out most of the noise came from that!

blksn955.o · Oct 24, 2005

My flow-tech's are showing their age, I have a small pen hole by one of the collectors, and the welds around the primary tubes are not so even and gives alttle leakage there as well...

Next set will either be bbk's or bassani. prob. long tubes.

urban96 · Oct 24, 2005

SMOKEDYA · Oct 24, 2005

Trust me i've had flow tech's and there junk!!!!!!! I now have bassani equal lenths and there awsome. In my beleif i would have my choices in this order of headers 1:Bassani coated and maybe L/T's 2: JBA's coated 3:MAC coated and as well maybe L/T's. Over my mods on my 95 i've found out that you get what you pay for. BBK dont even run there own products on there race car????? So go figure on them, atleast thats what i've heard?????? peace

john

AMERICANBULLIT · Oct 24, 2005

I was just wondering whether someone could help me out with something. I own a 2004 v6 convertible stang, and want a louder sound. i do not realy care too much about hp at this time--okay maybe i'm lying. still, i really just want pump the sound of my car for a small price. i am sick of these guys with honda civics roaring past me on the st. i want my mustang to roar back. your comments would really help. thanks!

urban96 · Oct 24, 2005

AMERICANBULLIT said:
I was just wondering whether someone could help me out with something. I own a 2004 v6 convertible stang, and want a louder sound. i do not realy care too much about hp at this time--okay maybe i'm lying. still, i really just want pump the sound of my car for a small price. i am sick of these guys with honda civics roaring past me on the st. i want my mustang to roar back. your comments would really help. thanks!

1 chamber flows or SLP's

blksn955.o · Oct 24, 2005

I would take bbk anyday over MAC...IMHO MAC sucks balls, poor quality, cheap product, poor life span. I am picky though. The bbk stuff I have been party too is much much nicer in flanges, coating, fitment,and lifespan.

I have MAC shifter, pullies, o/r H, and hate them...well the shifter is decent but not close to the pro5.0 or mgw. Put the MAC upper controle arms on a buds 00gt and they were horrable, the adj. would not even go to the stock range and all the way out was too much.

mo_dingo · Oct 24, 2005

I really like BBK's solid flange design. Prevents warping, which is the #1 problem w/ headers.
Scott

5.0_GT_kid · Oct 24, 2005

blksn955.o said:
I would take bbk anyday over MAC...IMHO MAC sucks balls, poor quality, cheap product, poor life span. I am picky though. The bbk stuff I have been party too is much much nicer in flanges, coating, fitment,and lifespan.

+1, my MAC H-pipe sucks balls

My flow-tech headers leak...

Pokageek

Active Member

SMOKEDYA

haulbalz

Pokageek

Active Member

blksn955.o

urban96

bubb rubb says:"woo woooooo"

SMOKEDYA

AMERICANBULLIT

New Member

urban96

bubb rubb says:"woo woooooo"

blksn955.o

mo_dingo

5.0_GT_kid

Similar threads

My flow-tech headers leak...

Active Member

Active Member

bubb rubb says:"woo woooooo"

New Member

bubb rubb says:"woo woooooo"

Similar threads

Privacy & Transparency

Privacy & Transparency