I've already got my speedo gear for the 3.55 gears. I put it in and my speedo still reads fast by about 10 miles per hour at all speeds. Also, it never goes down to zero. When I am stopped the speedo shows like 7-10 mph. Any suggestions? Is it the cable?
Considering that you also know that it's off by 10mph or so, what I would do is pull your speedo needle off, and leave that little clear shield off your cluster. Then, drive down the road with a buddy driving next to you, and tell him before hand to drive exactly 25, and have him give you a thumbs up when he hits 25.. then, take the needle you pulled off, and push it back on at the 25mph mark. Then have him speed up a little, and yell out speeds to make sure it's on right.
Considering that you also know that it's off by 10mph or so, what I would do is pull your speedo needle off, and leave that little clear shield off your cluster. Then, drive down the road with a buddy driving next to you, and tell him before hand to drive exactly 25, and have him give you a thumbs up when he hits 25.. then, take the needle you pulled off, and push it back on at the 25mph mark. Then have him speed up a little, and yell out speeds to make sure it's on right.