• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

My TFS H/C/I Progress Thread

  • Thread starter Thread starter Aliate X
  • Start date Start date May 23, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 23, 2006
#1
  • May 23, 2006
  • #1
Well I figured this is needed because so many people ask so many questions about these TFS kits. As soon as this is all finished, there will be a dyno run with dyno video/sheet/numbers and before/after street videos.

Well lets start with how the motor looked before I started. Bone stock...even had the air silencer and dist. boot....I added the headers shortly after I bought the car (bbk ceramics).



Starting the tear down. Everything looked in really good shape minus one cylinder that had a few scores, but no big deal.




And here come the parts in the mail.....$2,642.68 for everything you see there. That is the TFS track heat kit in the black option with a FRPP water pump, TFS A/C Delete, ARP head stud kit (kit comes with ARP bolts) and FRPP lifters.



Other stuff I had to order :

TFS cylinder head dowels
2 extra TFS thermal plugs for the heads b/c Im running no emissions.
Throttle body still to come.

Heads, lifters, pushrods, and rockers all setup.



Lower intake on, along with 1 header, it seems that the new heads are larger so the driver side header will no longer go in without moving the steering linkage out of the way temporarily.




This Wednesday - Sunday, I hope to get the rest of the motor finished, I really ran into no problems with this kit except for dropping stuff into the oil pan lol. Thank god for a mechanics claw....

As soon as this is all together and the car is on the road the next weekend I will be heading down to Long Island (Mustang Magic) for a custom tune/flip chip. Im hoping to put down some real good numbers with this kit.

Ill keep this thread updated as progress follows.
 

Attachments

  • DSCF1072.webp
    46.3 KB · Views: 97
  • DSCF1301.webp
    43.3 KB · Views: 130
  • DSCF1340.webp
    33.9 KB · Views: 129
  • PICT0290.webp
    59.3 KB · Views: 138
  • PICT0306.webp
    83 KB · Views: 166
  • PICT0315.webp
    56.6 KB · Views: 125

Tonys96Cobra

professional deer "mounter"
Oct 28, 2005
19
9
29
Syracuse
May 23, 2006
#2
  • May 23, 2006
  • #2
Looks awesome! i have a feeling your gonna love your "new" Mustang! Makes me want some head (and the c/i too)
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 23, 2006
#3
  • May 23, 2006
  • #3
Tonys89GT said:
Looks awesome! i have a feeling your gonna love your "new" Mustang! Makes me want some head (and the c/i too)
Click to expand...

lol yeah I cant wait, its definitally going to feel like a new car.
 

Joe P.

Founding Member
Aug 1, 2002
56
0
0
Syracuse
May 23, 2006
#4
  • May 23, 2006
  • #4
Lookin' good dude. Make sure you change your oil after you get her started.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
May 23, 2006
#5
  • May 23, 2006
  • #5
Awesome, i really wish i had the money to do that seems like lots of fun, i cant wait to see the results. How hard are the heads to install?
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 23, 2006
#6
  • May 23, 2006
  • #6
mob said:
Awesome, i really wish i had the money to do that seems like lots of fun, i cant wait to see the results. How hard are the heads to install?
Click to expand...

Easy...the whole swap really isnt "hard" its just time consuming, like tomorrow Im going to take the timing cover back off because Im not 100% sure that I have locktite on the cam sprocket bolt. Actually bolting the heads on was probably the easiest part so far, you basically just put them on and follow the torque down procedure, thats about it.

The cam is probably the hardest part just because you have to be so careful, and if you mess something up your risking the entire motor.

Btw, I just opened the box with the filler neck in it, it has to be one of the cleanest looking filler necks I have ever seen, its going to look so sweet aganist the black, its just a very simple looking peice, the cap is just a circle of aluminum about 1/2 an inch thick with "TrickFlow" machined into it. I had FRPP valve covers a while back and they look retarded compared to these.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
May 24, 2006
#7
  • May 24, 2006
  • #7
cool thanks man, just wondering because im going to be ordering afr 165's sometime at the end of the year, and I have a long time friend who buys and sells mustangs, hes built many motors, and can do anything, gears, etc. but hes just a home mechanic does all the stuff in his driveway so i wasent sure if i should trust him or just pay alot of money to have a machine shop instal it and measure everything etc.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 24, 2006
#8
  • May 24, 2006
  • #8
mob said:
cool thanks man, just wondering because im going to be ordering afr 165's sometime at the end of the year, and I have a long time friend who buys and sells mustangs, hes built many motors, and can do anything, gears, etc. but hes just a home mechanic does all the stuff in his driveway so i wasent sure if i should trust him or just pay alot of money to have a machine shop instal it and measure everything etc.
Click to expand...


Honestly, I know youve done work to your car and I would suggest doing it yourself, I feel so proud looking at the motor and it looks like something you see on TV or w/e and I know that I built it.

And its just nice to be able to say "I did the work" when someone asks.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
May 24, 2006
#9
  • May 24, 2006
  • #9
sweet man, I have alot of time to think about it but id like to do it my self and maybe the guy can stand behind and watch me. Goodluck with everything and post the results when its done.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 24, 2006
#10
  • May 24, 2006
  • #10
mob you will have no problem, i rebuilt mine stocker from the main bearings up with ease. I had my bro-inlaw there to make sure i didnt screw anything up, but these pushrods are as easy as it gets. and i agree the heads are the easiest thing to slap on.

AliateX, did you use the front and rear intake rail gaskets? or did ya just use RTV. it was a real biotch making sure they lined up fine, next time i thining of ditching them for RTV.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 24, 2006
#11
  • May 24, 2006
  • #11
Aliate X said:
\As soon as this is all together and the car is on the road the next weekend I will be heading down to Long Island (Mustang Magic) for a custom tune/flip chip. Im hoping to put down some real good numbers with this kit.
Click to expand...


Please, if you have 1/2 a brain you will listen to me and NOT take your car to mustang tragic!

Aside from the FACT that they suck, there is nothing on your car requiring a $600+ flip chip. I did 304hp/339tq with that combo stock eec tuned myself at the track. If you have to take it to a shop, take it to realspeed.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 24, 2006
#12
  • May 24, 2006
  • #12
Grn92LX said:
Please, if you have 1/2 a brain you will listen to me and NOT take your car to mustang tragic!

Aside from the FACT that they suck, there is nothing on your car requiring a $600+ flip chip. I did 304hp/339tq with that combo stock eec tuned myself at the track. If you have to take it to a shop, take it to realspeed.
Click to expand...

They set up my rear end and I cant say anything but good things about them. Its good to have the chip anyways for the future, its 600$ including the chip.

89white50 said:
AliateX, did you use the front and rear intake rail gaskets? or did ya just use RTV. it was a real biotch making sure they lined up fine, next time i thining of ditching them for RTV.
Click to expand...

I just used RTV on the ends, it says in the directions not to use the gaskets anyways, but I cant figure out why they supply them..
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 24, 2006
#13
  • May 24, 2006
  • #13
Aliate X said:
They set up my rear end and I cant say anything but good things about them. Its good to have the chip anyways for the future, its 600$ including the chip.
Click to expand...


Unfortunatly, you'll learn

I made the mistake of letting them tune my car and it was money wasted. I had to fix it all myself, which was what I shoulda done from the get go. $600 is a waste of money, I paid less than that for my PMS which can be used over and over with no hundreds of dollars for reburn fee's. I wish you luck b/c you WILL need it
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
May 24, 2006
#14
  • May 24, 2006
  • #14
Grn92LX said:
Unfortunatly, you'll learn

I made the mistake of letting them tune my car and it was money wasted. I had to fix it all myself, which was what I shoulda done from the get go. $600 is a waste of money, I paid less than that for my PMS which can be used over and over with no hundreds of dollars for reburn fee's. I wish you luck b/c you WILL need it
Click to expand...

Is there anyone else that can tune a h/c/i setup, I am under the impression that this car will not run right without a professional tune, I have an AFPR and I know how to set timing and such. Because if its not needed, than I can definitally use the 600 on something else.
 
L

low5.0

New Member
Feb 21, 2003
54
0
0
las vegas
May 24, 2006
#15
  • May 24, 2006
  • #15
I have the same tfs kit without any problems. My car is not tuned and im getting 20+ mpg. Will be going on the dyno soon to see what I can put down.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 24, 2006
#16
  • May 24, 2006
  • #16
Aliate X said:
Is there anyone else that can tune a h/c/i setup, I am under the impression that this car will not run right without a professional tune, I have an AFPR and I know how to set timing and such. Because if its not needed, than I can definitally use the 600 on something else.
Click to expand...


Ok good I got you listening now

I ran that combo on a 100% stock eec with very little issues. maybe a little surging here and there. If you're using a pro m meter you could try and find a used pro m optomizer which will tune the maf voltage and help with dialing in the idle. It also will do the same for WOT. Or you can buy a used PMS for $400 or so and tune it yourself.

Try it as is before buying anything. But do yourself a favor and don't let mustang tragic touch your car
 

Slo 5.0

Member
Apr 6, 2005
144
0
16
St. Louis
May 24, 2006
#17
  • May 24, 2006
  • #17
what length pushrods did you get with that kit? I just bought the tfs heads and stage 1 cam when i bought the pushrods i was given 6.350 length, but i think they're supposed to be 6.700.
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
May 24, 2006
#18
  • May 24, 2006
  • #18
looks great man. Im leaning towards the trickflow kit myself, I hear the heads respond very well with porting
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
May 24, 2006
#19
  • May 24, 2006
  • #19
How much trouble is the cam swap with the motor still in the car? I know it can be done, but is it a breeze or more of a pita. Looking at it w/ my car looks like the cam would have be started angled, but it also looks like it may open up a lot once you pull crap off. What else did you need besides what was in the kit?
 

stang730

New Member
Apr 30, 2006
56
0
0
Long Island N.Y.
May 24, 2006
#20
  • May 24, 2006
  • #20
looks good dude. Im puttin on the same kit next week. along with the mass air, msd and cold fusion n2o, thanks to all from stangnet for the info. let me know how she runs, i cant wait!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
620
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
W
I need a 1997 Mustang PATS A expert!
  • Wolfdogg
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
206
1996 - 2004 SN95 Mustang -General/Talk- Oct 5, 2026
Noobz347
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
605
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
736
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?