My TFS H/C/I Progress Thread

90_Red_LX said:
How much trouble is the cam swap with the motor still in the car? I know it can be done, but is it a breeze or more of a pita. Looking at it w/ my car looks like the cam would have be started angled, but it also looks like it may open up a lot once you pull crap off. What else did you need besides what was in the kit?


Once you get all the accessories off the front of the motor the only other things that have to be removed is the radiator and unbolt the a/c condensor and swing it out of the way. Cam will slide right in.
 
Posted by slo5.0
(what length pushrods did you get with that kit? I just bought the tfs heads and stage 1 cam when i bought the pushrods i was given 6.350 length, but i think they're supposed to be 6.700.)


6.7" is what came in my kit
 
congrats man..i just got done installing a fresh block w/ gt40 heads, e-cam, 1.7 rr's, cobra intake, w/ all the other bolt-ons w/ 3.73's..and the car FLIES up top..you'll be impressed w/ the trick flow kit for damn sure

i had no problems w/ idling or anything..i adjusted the TPS and set my timing at 12 and it idles as smooth as glass...one thing we did do is drill a small hole in the butterfly of the TB and im assuming it helped..the guy who did it runs renegade class so hes a guru, but it'll rip man, just adjust your FPR regulator and u should be good
 
whiteyford0212 said:
congrats man..i just got done installing a fresh block w/ gt40 heads, e-cam, 1.7 rr's, cobra intake, w/ all the other bolt-ons w/ 3.73's..and the car FLIES up top..you'll be impressed w/ the trick flow kit for damn sure

i had no problems w/ idling or anything..i adjusted the TPS and set my timing at 12 and it idles as smooth as glass...one thing we did do is drill a small hole in the butterfly of the TB and im assuming it helped..the guy who did it runs renegade class so hes a guru, but it'll rip man, just adjust your FPR regulator and u should be good

Ah, I forgot about the TB thing, thanks for the reminder.
 
Aliate X said:
Well Grn, I broke one of my stock injectors so Im just going to bite the bullet and get 24 lb injectors and a Pro M MAF, who deals Pro-M stuff, I know summit doesnt.


Try www.artsperformanceparts.com I've dealt with him and so have my friends with no issues.

What are your down the road plans? Reason I ask is 30's may be a better choice if you have more mods planned. You can also try the 4/s section on corral, theres always people selling maf and injector stuff.

I forgot to mention you can also buy a $15 Ford idle air adjuster plate to help with surging. It goes in between the IAC.

Where on LI are you?
 
Grn92LX said:
Try www.artsperformanceparts.com I've dealt with him and so have my friends with no issues.

What are your down the road plans? Reason I ask is 30's may be a better choice if you have more mods planned. You can also try the 4/s section on corral, theres always people selling maf and injector stuff.

I forgot to mention you can also buy a $15 Ford idle air adjuster plate to help with surging. It goes in between the IAC.

Where on LI are you?

not on LI, rockland county
 
Grn92LX said:
I forgot to mention you can also buy a $15 Ford idle air adjuster plate to help with surging. It goes in between the IAC.

Where ca you buy that? With my bcam my car was idling high, around 1100, so i used jbweld and covered up the hole in the butterfly and it went down to about 700ish. It has bad surge sometimes but i think its cause of a bad ground, i just got my battery charged again and its idling kinda high around 1000 now, whoops sorry got off track.