• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Name these stroker parts

  • Thread starter Thread starter Black1987Stang
  • Start date Start date Mar 30, 2008
  • 1
  • 2
Next
1 of 2 Next Last

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 30, 2008
#1
  • Mar 30, 2008
  • #1
This is from a 331 I just bought, the pistons have 12347-030 on all the tops, they say Probe on the inside. The rods have no markings except for VK 631, VK650, VK570 etc, and each rod has a different number, the same marking is on the cap and the other is on the rod itself, assuming just so you can't mix up the caps? I think they are I-beams, they are all forged including the crank, the crank has some reallly deep holes from balancing, I also want to find out what balance it is, I have the balancer but not the flywheel, I can't find any markings on the balancer. I want to find out what compression ratio the pistons are, since they are supposedly for a blower application but I can't decide on what cc heads to get without knowing this.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 30, 2008
#2
  • Mar 30, 2008
  • #2
and I can't find ANY info on Probe pistons from Summit or Jegs?? I thought Probe was a pretty big name company
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Mar 30, 2008
#3
  • Mar 30, 2008
  • #3
030
Click to expand...

well its bored .030 over lol

12347-030
Click to expand...

guessing by this its a 347..
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 30, 2008
#4
  • Mar 30, 2008
  • #4
Well I found out the pistons....12347-030 it's about halfway down...
http://www.probeindustries.com/Pistons/Piston Specifications/PistonSpecs.htm

Now to find out about the balance.......
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Mar 30, 2008
#5
  • Mar 30, 2008
  • #5
im on the probe website and nothing is coming up for those nums...
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Mar 30, 2008
#6
  • Mar 30, 2008
  • #6
man in not findin crap lol...
 

stang_hp

Member
Feb 25, 2007
62
0
6
cartersville Ga.
Mar 30, 2008
#7
  • Mar 30, 2008
  • #7
The pistons are SRS sportsman race series flat top - bore:4.030, weight:472, compression ratio (58cc-10.37), (61cc-9.98), (64cc-9.65),(68cc-9.23). I dont think flat top pistons are for blower applications.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Mar 30, 2008
#8
  • Mar 30, 2008
  • #8
Yep, those are 331 pistons for a 5.4" rod and 1.175" CH with a -4 cc dish.

If you can give me the headgasket thickness (part #) you are going to use, and your cylinder head combustion chamber size, and your piston to deck measurements.

It can be -.010 - .010 typically.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 31, 2008
#9
  • Mar 31, 2008
  • #9
Well here's the thing, help me out with this. I don't know what head gaskets to use and I found a nice set of Trickflow Twisted wedges but the one chamber had detonation problems so I assume it was grinded out or w/e but it was cc'd to a bigger size, so now all the other chambers have to be cc'd to that cc. I'm pretty sure the biggest cc is 65cc soo that would make it around 9.6ish (depending on the gaskets I use and deck height of course and if I want to keep that cr) and the block looks like it's never been decked, neither the heads. Would these pistons be ok for a supercharger or turbo? and how do you exactly make the chamber a bigger cc? grind away material in the chamber right? I've done cc work but only to verify it's the correct cc. oh and what would a good gasket be to use on this?
 

Fast63

New Member
Sep 20, 2007
717
0
0
Mar 31, 2008
#10
  • Mar 31, 2008
  • #10
Those pistons are also for a 347 with 5.315 rods, you sure that's not what you have?
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Mar 31, 2008
#11
  • Mar 31, 2008
  • #11
Fast63 said:
Those pistons are also for a 347 with 5.315 rods, you sure that's not what you have?
Click to expand...

Well I was told it was a 331 so I'm assuming it is. Thats why I'm trying to find more about the rods....
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Mar 31, 2008
#12
  • Mar 31, 2008
  • #12
Since it has the Probe pistons in it, look on their site at the rods they have see if you can match them up as far as what they look like.

Look on the front counterweight of the crank for the serial number if any... My shops also stamp the bob weight on the counterweight as well.

What type of balancer is it? Is their a PT# stamped on it?
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Apr 2, 2008
#13
  • Apr 2, 2008
  • #13
Rick 91GT said:
Since it has the Probe pistons in it, look on their site at the rods they have see if you can match them up as far as what they look like.

Look on the front counterweight of the crank for the serial number if any... My shops also stamp the bob weight on the counterweight as well.

What type of balancer is it? Is their a PT# stamped on it?
Click to expand...

It looks like a Ford emblem on the balancer and I found this number on it.....E4TE-A3A

and also this one....112216

I haven't looked on the crank yet for any numbers since it's not at my house.

and while I got a thread going anybody happen to know what cc Trickflow twisted wedge heads are?

Thanks
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Apr 2, 2008
#14
  • Apr 2, 2008
  • #14
According to a FoMoCo parts catolog, It crosses over to part number E4TZ-6316-A which is a 50oz 302 balancer. STOCK BALANCER

Stock TFS TW is 61cc
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Apr 3, 2008
#15
  • Apr 3, 2008
  • #15
Thanks for the info.

Sooo I have a 302 50oz. balancer on a 331, uhhhhh lol what's everyone thinking?? Could it have been balanced to 50oz, or it was a hackjob and someone just threw on a balancer? The pistons are proof it's not still a 302 so what should I do?
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Apr 3, 2008
#16
  • Apr 3, 2008
  • #16
was gonna say probeindustries.com
 

white 89 GT

Member
Apr 3, 2003
281
0
17
Tacoma
Apr 3, 2008
#17
  • Apr 3, 2008
  • #17
I think those rods are hawks racing, same pistons i have 12347 probe flat tops for inline and tw and those pistons can be used with 5.4 rod for 331 and 5.315 rod for 347 ci.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Apr 3, 2008
#18
  • Apr 3, 2008
  • #18
The rotating assembly had to be balanced if it was ran. I would take thoes heads to a performance shop and have them work on them. Also you need to have the rotating assembly rebalanced unless the rods are marked, cause you need them to go back in the same place.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Apr 3, 2008
#19
  • Apr 3, 2008
  • #19
Yea I marked the pistons so I put them in the same cylinders and the caps and mains are marked so they all go in the same direction and order. that was the first thing I did. Soo is it possible they balanced the 331 to 50oz? Any disadvantages to that? or any other scenarios?
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Apr 3, 2008
#20
  • Apr 3, 2008
  • #20
So the motor is apart??? Just have the crank spun and they can tell you the balance..

I've seen a 331 forged assembly balanced to 50oz, crank needs a lot weight removed but it can be done. Not really a big deal...
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

P
Engine Help 331 stroker
  • pdmount
  • Feb 19, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
401
Fox 5.0 Mustang Tech Feb 21, 2026
pdmount
P
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
213
Views
5K
Classic Mustang Specific Tech Wednesday at 6:44 PM
DadLife0724
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
981
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
A
Engine 04 GT timing chain issue
  • AwesomeX1103
  • Sep 3, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
555
SN95 4.6L Mustang Tech Nov 5, 2025
Noobz347
R
Progress Thread 351w stroker rotating assembly and build
  • Ric4eyedFox
  • Mar 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 24, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?