Name this Carb (pics)

[justhereforinfo]

I found 8050B on the side, but cant find that on Holley's site. Anyone know the size?

 

[95GTAODE]

Looks like a street avenger. Post up the list #'s from the right front of the air horn (The thing the choke plate is in)

 

[Gearbanger 101]

What do I win?

Holley Performance Products 600 CFM Four Barrel Street Carburetor 0-80457S

 

[95GTAODE]

A wonderful time-share on the sunny beaches of Cuba.... Look again at the 80457s.... It has side hung bowls, where his has centre hung "cathedral style" bowls....

 

[justhereforinfo]

Looks like a street avenger. Post up the list #'s from the right front of the air horn (The thing the choke plate is in)

Will do....right after dinner.

 

[justhereforinfo]

Holley Performance Products 670 CFM Four Barrel Carburetor*0-80670

Thanks for the list # location. Its a 670 4 barrel.

 

[85_SS_302_Coupe]

That's a very nice carb...clean it up and run it.

 

[RsStanG1987]

Looks like my 650 doublepumper

 

[justhereforinfo]

That's a very nice carb...clean it up and run it.

Thanks, I just picked this car up a few days ago and plan on running a 100 shot through it after everything checks out. All the interior is out now. I'm gonna carpet it and throw in a couple seats. The last owner said he built the motor up for spray, lets hope he did a good job...

 

[Dean85GT]

Please just put on a real feed line

 

[justhereforinfo]

Yea, there's some work to be done. Like I said, I just got it a few days ago. I plan on doing some research before touching anything. It wont be a daily driven car, more like a strip project that is street legal. I just came from a 350whp 380ft.lb SRT4, so this is a whole new world.

Is there anything that needs to be done to the rear end of an 85 GT before spraying a 100 shot? I thought I heard something about a pin that can break and cause the axle to come loose.....

 

[85_SS_302_Coupe]

Yea, there's some work to be done. Like I said, I just got it a few days ago. I plan on doing some research before touching anything. It wont be a daily driven car, more like a strip project that is street legal. I just came from a 350whp 380ft.lb SRT4, so this is a whole new world.

Is there anything that needs to be done to the rear end of an 85 GT before spraying a 100 shot? I thought I heard something about a pin that can break and cause the axle to come loose.....

Do a search about C clip eliminators. Basically if those fail your axle could shoot out the side. There's lots of guys running 400hp with bone stock rear ends but if you're gonna race it a lot on slicks then it's a good idea to build the rear end up.

 

[old&ntheway]

If you want to make up your own feed I have tons of 3/8" stainless tubing cheap.