snarfcop New Member Feb 26, 2007 5 0 0 Asheville, NC Feb 27, 2007 #1 Feb 27, 2007 #1 Im putting in a new cam, heads and intake combo on my SN95 i just got. The question is can you get the old cam out without raising the motor, like you can on the fox body cars?
Im putting in a new cam, heads and intake combo on my SN95 i just got. The question is can you get the old cam out without raising the motor, like you can on the fox body cars?
M MustangGT95 New Member Jul 29, 2003 407 1 0 Feb 27, 2007 #2 Feb 27, 2007 #2 You should have plenty of room if you remove the radiator and AC condensor. I could be wrong tho.
snarfcop New Member Feb 26, 2007 5 0 0 Asheville, NC Feb 27, 2007 #3 Feb 27, 2007 #3 Thanks, It looked like there would be enough room but I was not sure.
T tjh566 New Member May 22, 2004 608 0 0 Northern Va Feb 27, 2007 #5 Feb 27, 2007 #5 yes, radiator and a/c condensor out, then at the very last part of the cam I had to tilt it to one side slightly.
yes, radiator and a/c condensor out, then at the very last part of the cam I had to tilt it to one side slightly.
F fiveohh94gt New Member Dec 26, 2003 277 0 0 Feb 27, 2007 #6 Feb 27, 2007 #6 yea, it'll come out, i didnt even have to discharge my a/c system, just lifted the condenser up with it still connected
yea, it'll come out, i didnt even have to discharge my a/c system, just lifted the condenser up with it still connected