Need clutch advice

I will probably need to replace my clutch in the near future, and would much appreciate some advice on which clutch to get.

I have been running a FRPP King Cobra clutch for the last 8 years or so - and although it has done a good job I would like to get one that gives better driveability, i.e. a lighter pedal but capable of the power levels I am at now (well, I dont know what kind of HP but I am guessing say 350/370 on the engine and lots of torque, see sig for dets).

This is for my daily driver so my priorities are driveability and durability, but it should also be good for some trackdays use - both drag and road course.

I have heard good things about Centerforce, and been looking at this one:

Centerforce DF021048 - Centerforce Dual Friction Clutches - Application - SummitRacing.com

Anyone familiar with this one? Other recommendations? I have searched both here and other places but it seem to be a veritable clutch jungle out there...

My flywheel has been re-surfaced once (when I did the KC clutch), do I need to replace this as well, or should it be ok to re-surface it again?

Thanks all your input/advice -

I was under the impression that the Spec clutches were pretty race oriented, very grippy i.e. bit tricky to drive in stop and go traffic? But they are good for a daily driver? Lighter than the KC?

I really don't think I am going to do any more engine mods, so surely a Centerforce DF must be able to cope easily with my power level?

Does anyone have any experience with Zoom clutches? Any good?