• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need clutch help

  • Thread starter Thread starter 88t-topGT
  • Start date Start date Jan 23, 2008
8

88t-topGT

New Member
Jun 8, 2005
5
0
1
Upper Darby, PA
Jan 23, 2008
#1
  • Jan 23, 2008
  • #1
I just put a new motor in my 88 GT and got it running but am having a problem when I try to put the car in gear. When I press down on the clutch pedal and begin to put it in gear (any gear) the car moves, even though the clutch pedal is fully pushed in. I have a stock cable setup and am hoping the problem is related to this and not something internal. I made 100% percent sure the flywheel/clutch setup was installed correctly when I put it in. thanks for any help.
 
S

stalkercobra89

New Member
Jun 19, 2005
30
0
0
Jan 23, 2008
#2
  • Jan 23, 2008
  • #2
sounds like what happened to me the clutch isn't disengaging all the way probably due to the cable being streched. if your goin to replace it i went with the maximum motorsports quadrant fwa and cable and it's like butter. just what ever you do stay away from those aluminum quadrants from bbk and all those companies. they change the radius of the quadrant for some reason which makes it harder to push and wears out the cable near the firewall. i think i got it all off of americanmuscle.com
 

ford302redneck

Member
Jul 28, 2007
85
0
6
Hartsville, SC
Jan 23, 2008
#3
  • Jan 23, 2008
  • #3
stalkercobra89 said:
sounds like what happened to me the clutch isn't disengaging all the way probably due to the cable being streched. if your goin to replace it i went with the maximum motorsports quadrant fwa and cable and it's like butter. just what ever you do stay away from those aluminum quadrants from bbk and all those companies. they change the radius of the quadrant for some reason which makes it harder to push and wears out the cable near the firewall. i think i got it all off of americanmuscle.com
Click to expand...

could u explain more on this subject?
 
You must log in or register to reply here.

Similar threads

4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
127
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
889
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
278
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
235
The Welcome Wagon Aug 21, 2026
Noobz347
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
726
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?