need help ASAP engine turns when trying to remove crank pulley bolt

8

87lc2

Member

Oct 16, 2005

214

0

17

Nov 10, 2005

#1

• Nov 10, 2005

• #1

attempting to install a new balancer and when turning the pulley bolt to loosen it, the engine just turns. I have the car in 4th, shouldnt the engine not turn? on an automatic car i would just vise grip the flywheel, but i cant get to the flywheel on this car. any help appreciated, car is on the lift as we speak......

 

sweet88gt

Member

Jun 25, 2005

334

0

16

Venice FL

Nov 10, 2005

#2

• Nov 10, 2005

• #2

Try putting two of the bolts that attach the crank pulley and between the bolts hold a pry bar in the opposite direction of the impact gun. I dont know if this would work but it looks like it would. Good luck
Never mind I am a dumbass I thought you needed to remove the balancer sorry.

 

speadfreak

New Member

Oct 13, 2005

118

0

0

Nov 10, 2005

#3

• Nov 10, 2005

• #3

put the car in 5th gear and have somebody sit in the drivers seat and mash the brake peddle...............kinda hillbilly, but it worked for me last week.

 

5.02GO

Founding Member

Jun 26, 2001

308

0

16

Ky, Blue Sky Country

Nov 10, 2005

#4

• Nov 10, 2005

• #4

Umm.........Just use an impact wrench.

 

8

87'GTstang

New Member

Feb 16, 2004

1,025

0

0

Nov 10, 2005

#5

• Nov 10, 2005

• #5

5th gear will be the most effort to turn the engine over in gear. Also, instead of using someone pressing the brake pedal, the parking brake works also

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Nov 10, 2005

#6

• Nov 10, 2005

• #6

Some folks in here use the 'bump the motor with a breaker bar on the crank bolt' method. I dont have the guts for it myself.

The brake, Impact and PB should do it.

Good luck.

 

5.02GO

Founding Member

Jun 26, 2001

308

0

16

Ky, Blue Sky Country

Nov 10, 2005

#7

• Nov 10, 2005

• #7

HISSIN50 said:

Some folks in here use the 'bump the motor with a breaker bar on the crank bolt' method.

Click to expand...

Those people need their head examined too!

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 10, 2005

#8

• Nov 10, 2005

• #8

5th gear, parking brake on, that's the way

 

8

87lc2

Member

Oct 16, 2005

214

0

17

Nov 10, 2005

#9

• Nov 10, 2005

• #9

finally found my impact and got it off, but now i have another issue.....im using the tool to get the balancer off, but nothings happening. im using the big bolt in the middle of the tool on the crank bolt and i just realized that move do anything.....what do i rest the tool on to break the balancer free???

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 10, 2005

#10

• Nov 10, 2005

• #10

Remove the crank bolt. Make sure you remove the washer that sits in the middle of the balancer there under the bolt too. Then put the cone piece on the end of the large center bolt. Use the pulley bolts and put them through the flat metal piece with the slots and screw them into the balancer but not all the way tight, then just turn the big bolt in and it pull push against the crank snout and pull the balancer off.

 

8

87lc2

Member

Oct 16, 2005

214

0

17

Nov 10, 2005

#11

• Nov 10, 2005

• #11

thanks for all the help guys, i forgot that there was a washer there....took that off threaded the bolt halfway back in and it came right out with the puller.....would have taken me half hour instead of two if i would have realized all of this from the start.....thanks again

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 11, 2005

#12

• Nov 11, 2005

• #12

That washer trips up alot of people, glad you got it sorted.

 

trbkrb

Founding Member

Jun 4, 2001

1,976

4

39

Houston, TX

Nov 11, 2005

#13

• Nov 11, 2005

• #13

5.02GO said:

Those people need their head examined too!

Click to expand...

LOL! Yes, but it sure beats a $120 tow bill when the balancer explodes in the parking lot at work! I got it changed pretty easily after my wife brought me my floor jack, stands, and other tools I didn't have in the car.