• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need Help. ASAP

  • Thread starter Thread starter rodrir2
  • Start date Start date Apr 15, 2006
R

rodrir2

New Member
Apr 15, 2006
4
0
0
Apr 15, 2006
#1
  • Apr 15, 2006
  • #1
I have read all the search results and the only thread that was like mine nobody had a reply to.
I have a 306 D.S.S block with all the goodies but as I was driving it yesterday it developed a knock. This knock only happenes at idle. It runs fine above idle and has no knock. The knock is pretty noticeable at idle but not at speed. It has 80 Psi of oil pressure at all times including idle. What could this be? I took the top end of the engine off and don't see anything like a broken spring or rocker arm. So what could this be?
 
R

rodrir2

New Member
Apr 15, 2006
4
0
0
Apr 15, 2006
#2
  • Apr 15, 2006
  • #2
Oh and I forgot to mention, this engine does not have but around 5,000 miles since the initial build.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Apr 15, 2006
#3
  • Apr 15, 2006
  • #3
how bad is the knock? do you have a mechanics stethoscope? how does your oil look when you last changed it...we need some more info here-oh, welcome to stangnet, sorry to see your first posts are for knocking engine noise, but welcome all the same!
 
R

rodrir2

New Member
Apr 15, 2006
4
0
0
Apr 15, 2006
#4
  • Apr 15, 2006
  • #4
Oil looked good. The knock is coming from the bottom end. I think maybe a wrist pin? What are your opinions? I am really hoping it is something else. Just installed a Tremec TKO Tranny and removed the flywheel. Could that be a feasible thing to check?
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Apr 15, 2006
#5
  • Apr 15, 2006
  • #5
oof...possibly on the pin...when you swapped the tranny, did everything go back together the way it's supposed to? Did it ever make that noise before?
 
R

rodrir2

New Member
Apr 15, 2006
4
0
0
Apr 15, 2006
#6
  • Apr 15, 2006
  • #6
I mean the tranny swap was a pain because I did it with a Lakewood scattershield instead of a normal bellhousing but it had never made that noise before. I just hope my new block isn't hurt.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
734
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
423
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
J
Intake replace help
  • jshyuw7
  • Jun 19, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
157
1996 - 2004 SN95 Mustang -General/Talk- Jun 19, 2025
Noobz347
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
915
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?