Need Help!! Brake Lines For Sn95 Brake Swap

i am trying to get my fox ready to go to mustang week but am having a tough time figuring out what soft lines i need to run the sn95 (99-04) front and rear brakes that were started by the previous owner. the issue i am having is that the lines that are on the rear have a y block on the pass rear and what i think is a bubble flare for the lines. i want to use the factory T fitting from the fox and need soft lines that have just a single inlet per side and use a standard double flare like the rest of the car.
also the drivers side front soft line has a much larger tube nut fitting than the passengers side. i think the lines are from a 99-04 GT but have no way to know for sure.

does anyone know what lines i need to order to get the brake system working?

please let me know asap because i am taking this car from a stripped roller with no drive train or wiring at all to a fully functional car in just over a month. i need to get all the parts here quickly so i can get this baby back on the road!!!

the sn95 line on the pass rear has another y block on it. i really dont want to just cap it off. this will be a drag car in the coming months and the last thing i want is to have any brake issues by cutting corners

i think i have it figured out.

my rear lines are from a 99. the pass side has a y block built onto the end that would connect to the hard line. since i have a t fitting on the axle i cant use another y block. they also use what i think is a bubble flare rather than the regular double flare

i got a set of 95 GT rear lines on the way and some 7/16 tube nuts to make them work. i have redone the hard lines from the stock fox t fitting already. just need to use the correct tube nuts and i should be good to go.