hey guys my first post to stang net and its a problom go figure, i have a 1993 mustang gt that used to be a aod now i just switched out to a tkoII 5 speedi switched the sensors and everything and installed a 306 blower motor and i put in a msd 6al and i hooked everything up and have a few questions
1. were is the yellow timing acceory wire that msd says to hook the white wire to
2. would the boost controller not being hooked up cause it to not spark
3. if it blew the 20gauge fuseable link what else could have blown we changed the pcm and checked all the wires to make sure there not burnt but now it wont spark does the msd box have a fuse in it and would the white wire not being hooked up from the msd box cause it not to spark any help would be appreciated.
1. were is the yellow timing acceory wire that msd says to hook the white wire to
2. would the boost controller not being hooked up cause it to not spark
3. if it blew the 20gauge fuseable link what else could have blown we changed the pcm and checked all the wires to make sure there not burnt but now it wont spark does the msd box have a fuse in it and would the white wire not being hooked up from the msd box cause it not to spark any help would be appreciated.