need help with my clutch cable!!

[95-HO_stang]

hi im pretty new here, i need some major help here. my tranny blew first gear, so i got a t5z tranny with a 92 bellhousing and an addator for my driveshaft, every goes in perfect exect the clutch cable, it is to short and i do not know what to do. my car is a 95 mustang gt with the 302.

 

[HISSIN50]

Welcome to the boards!

That was a little tough to follow. Why the fox III bell housing?

Assuming your bellhousing, input shaft, etc dimensions and logistics were figured correctly: What quadrant and cable are you running? Some quadrants require a longer (almost proprietary) cable.

Good luck.

 

[95-HO_stang]

i an still running the stock quadrant and cable, i got the tranny from a mustang shop that told me it had to be bolted on to a 86-93 bell housing( not to sure why). the cable is only an inch to an inch and a quarter short, would a adjustable clutch cable do the trick?