Need ignition carbed wiring pics for 87 notch

M

Matts89LX5.0

Founding Member

Nov 1, 2002

1,314

0

36

Long Island, NY

Oct 13, 2004

#1

• Oct 13, 2004

• #1

Anyone have any wiring diagrams or pictures of their ignition wiring in the engine bay on their mustang that was converted to carbed? I'm converting my 4 cylinder notch to a carbed 5.0. It was a 5.0 conversion already but i completely stripped it and am redoing everything. Just looking for some pictures if anyone can help me out. Thanks in advance.

Matt

 

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Oct 13, 2004

#2

• Oct 13, 2004

• #2

do yourself a favor , get a distributor from a parts store for a 78 granada with a 302 ( they should accept yours for a core ) and buy a MSD 6AL box and blaster coil , follow directions for wiring that are in the msd 6al instructions and you will be fine ....

 

M

Matts89LX5.0

Founding Member

Nov 1, 2002

1,314

0

36

Long Island, NY

Oct 13, 2004

#3

• Oct 13, 2004

• #3

well i have the stock coil hooked up, and have a vaccuum advance distributor. I have a whole drivetrain from my old 85 gt....i'm just missing wires somehow.

 

mike7581

New Member

Aug 18, 2004

42

0

0

Orange County, CA

Oct 13, 2004

#4

• Oct 13, 2004

• #4

here is a couple sites that may help i just did that same swap but i used a msd6al ignition so it is a little different but for god spark and power you should get one. i would send you some pics but i got frustrated with my carb and this week i am finishing putting in the efi which i should have done in the first place. anyways good luck

http://www.carbdford.com/

http://www.jason.fletcher.net/tech/v8/v8.htm

 

M

Matts89LX5.0

Founding Member

Nov 1, 2002

1,314

0

36

Long Island, NY

Oct 13, 2004

#5

• Oct 13, 2004

• #5

i found one of my old msd boxes, so i'm gonna use this 6A, any help now????