K Kurt Founding Member Feb 12, 2001 149 0 0 South Hill ,Va Jul 12, 2005 #1 Jul 12, 2005 #1 if you have the setup directions please let me know. Kurt
LMan Founding Member Aug 10, 2002 1,246 0 0 Mom's basement Jul 12, 2005 #2 Jul 12, 2005 #2 http://opelgt.com/photos/showgallery.php/cat/547
DarkBuddha Founding Member Dec 11, 2001 2,215 1 47 Seattle & Tampa Jul 12, 2005 #3 Jul 12, 2005 #3 I've got the pertronix ignitor and coil and I've gapped my plugs to 0.045" with no problems.
F ForceFed70 That's why they call it "dope" Founding Member Dec 6, 1999 4,818 1 69 BC Canada Jul 12, 2005 #4 Jul 12, 2005 #4 If your talking about the pickup gap, then you want 0.030" Plug gap is up to you, and depends on the engine, coil, and wires used. 0.045" sounds like a good place to start however.
If your talking about the pickup gap, then you want 0.030" Plug gap is up to you, and depends on the engine, coil, and wires used. 0.045" sounds like a good place to start however.
DarkBuddha Founding Member Dec 11, 2001 2,215 1 47 Seattle & Tampa Jul 12, 2005 #5 Jul 12, 2005 #5 70_Nitrous_Eater said: If your talking about the pickup gap, then you want 0.030" Click to expand... Oh geez... good call. I wasn't even thinking about that. And I think 0.030" is right as I recall for the pickup gap.
70_Nitrous_Eater said: If your talking about the pickup gap, then you want 0.030" Click to expand... Oh geez... good call. I wasn't even thinking about that. And I think 0.030" is right as I recall for the pickup gap.
K Kurt Founding Member Feb 12, 2001 149 0 0 South Hill ,Va Jul 13, 2005 #6 Jul 13, 2005 #6 Thanks, Yes the pickup gap is what I needed thanks, I had to take it out last minute for the core on the old distributor and my instructions burnt up in a house fire, so thanks alot. Kurt
Thanks, Yes the pickup gap is what I needed thanks, I had to take it out last minute for the core on the old distributor and my instructions burnt up in a house fire, so thanks alot. Kurt
Max Power Active Member Jul 31, 2003 1,774 1 36 St Paul Jul 14, 2005 #7 Jul 14, 2005 #7 I have heard that they will work with gaps as little as .010 and up to .050. but .030 is what the factory suggests.
I have heard that they will work with gaps as little as .010 and up to .050. but .030 is what the factory suggests.