I took out the fuel pump and wiring harness for the pump, but I am stuck. I modified it and removed the wires for the tail lights and un-needed stuff. So here's my problem. There is a brown/red wire running from the pump to the inertia switch, then a green/light green wire runs from that to a connector and another harness. I am at a loss right now. Where does this green/light green wire go to? What did you guys do to hook up the power to your fuel pump? What all am I going to need to get the fuel pump working on my '65? The fuel pump wiring is the last thing I need off the donor car and want to get rid of it ASAP. Thanks!