I just swapped in a new auto tranny on my 98 and well first off I can't tighten the top bolt on my starter...when I got it off it was by luck and now I can't seem to get it all the way back in. Well it probably wasn't the best idea in the world but since I had two of the 3 bolts securely in the starter I decided to try and start it up, and when I did all it does is make this nasty grinding noise and doesn't even turn the engine over. I'm stumped, I folowed every step out of my haynes manual so i'm oretty sure I did everything right. I don't know what to do...any help would be appreciated.