Okay this one is for you wiring gurus. So I pulled out the old pedal assembly and started looking for the harnesses that are supposed to be up under the dash to hook to the 5spd assembly and they are not there so I keep investigaing and finally realize that the ends were cut off of them and they were wired up to some harness for and old alarm system that had remote start capabilities that the previous owner installed. So now how am I supposed to hook this ***** up? I wired the reverse lights up underneath the car at the trans and jumpered the other two wires together. Is there any way I can bypass hooking the under dash wires up at all and still make the car start or do I need to come up with the jerry rigging job of the century to hook this stuff up? Please help anyone.