• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

New 03 Gt Owner. Opinions On Upgrades

  • Thread starter Thread starter lph008
  • Start date Start date May 21, 2015
L

lph008

New Member
May 21, 2015
4
0
1
May 21, 2015
#1
  • May 21, 2015
  • #1
Just sold my winter project 86 mustang gt. Bought a 03 gt with no cats, X-pipe, dual Flowmasters and cold air intake. Was wondering what you guys think are good bolt on upgrades. Not doing heads or anything. I plan on doing 373 gears, possibly headers, MAF, 70mm throttle body and plenum. Underdrive pulleys. What order should I do these in as far as best bang for your buck?? This is not my daily driver, also I will not be taking it to drag, just here and there cruise nights and banging gears around town. Thanks for any input
 
L

lph008

New Member
May 21, 2015
4
0
1
May 21, 2015
#2
  • May 21, 2015
  • #2
Can't figure out why it's loading picture upside down
 

Attachments

  • 20150516_153743.webp
    86.6 KB · Views: 155

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
May 21, 2015
#3
  • May 21, 2015
  • #3
If you're asking best bang for the buck.....I say scrap all of the rest and save up for a supercharger. Bolt on mods for this car can break you quick and aren't very rewarding as far as gains go. I can tell right off the bat, you're approaching this car like you would a 5.0L Fox body....Don't! Intake and exhaust mods do very little to increase the performance of the 4.6L SOHC cars. Power adders are where it's at. It's a big initial expense, but when you add up the cost of all of the bolt on parts you've just suggested, you're over half way to blower land....except instead of picking up 20hp with bolt ons, you'll pick up 120hp with the huffer!

I've been down the 2V modular road and if I could do it all over again, I would have gone with the blower first, instead of wasting thousands of dollars on bolt ons that only looked pretty.

That's my .02
 
Reactions: trombonedemon
D

Deleted member 38176

May 22, 2015
#4
  • May 22, 2015
  • #4
I had every single bolt-on available before going forced induction. My opinion?

-gears (4.10's or nothing, ESPECIALLY since it isn't your DD)
-full length subframe connectors (weld-in NOT bolt-on, install on a 4-post lift)
-longtube headers

......then start saving for a blower/turbo or spray it and be done.

All other bolt-ons are worthless and cost $$$, take it from me
 
L

lph008

New Member
May 21, 2015
4
0
1
May 22, 2015
#5
  • May 22, 2015
  • #5
Ok but I'm not going that route, honestly I will probably drive the car this summer and sell it. That's what I do. I buy toys and sell them after a few months or a year. So it wouldn't be worth it to put that kind of money into it. So basically I should just leave it as is since you guys are saying the bolt on mods won't do anything? ?
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
May 22, 2015
#6
  • May 22, 2015
  • #6
lph008 said:
Ok but I'm not going that route, honestly I will probably drive the car this summer and sell it. That's what I do. I buy toys and sell them after a few months or a year. So it wouldn't be worth it to put that kind of money into it. So basically I should just leave it as is since you guys are saying the bolt on mods won't do anything? ?
Click to expand...
Should have told us that up front. If you're just gonna flip it, leave it alone. Any mods you add to it now, is only going to cut into your profit margin when you sell it.
 
L

lph008

New Member
May 21, 2015
4
0
1
May 22, 2015
#7
  • May 22, 2015
  • #7
I wouldn't say flip. I just get bored really fast and always like new and different toys. My neighbors think I'm a freak lol. I come and go with different sleds, atvs, cars, dirtbikes go carts. I don't have a problem putting some money into toys but not supercharger money lol
 
D

Deleted member 38176

May 23, 2015
#8
  • May 23, 2015
  • #8
In that case, just spray it. A good nitrous kit will cost under $1K and you can easily pull it off and sell it when you sell the car.
 
You must log in or register to reply here.

Similar threads

New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
309
The Welcome Wagon Oct 19, 2025
Clutchfork
A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
429
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?