• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

New Best 1/8th mile times

  • Thread starter Thread starter slvrbullit302
  • Start date Start date Apr 25, 2004

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
Apr 25, 2004
#1
  • Apr 25, 2004
  • #1
Went to lassiter mtn tonight to test out the new drag suspension. Lets just say that it was instant gratification. Anyways now to the point of this post......

Best 60' N/A 1.71
Best 1/8 N/A 8.36

Best 60' 100 shot 1.60 (6" of air under the front tires)
Best 1/8 100 shot 7.90

Tried to get a video of the car pulling the tires but you can only do so much with a digi camera that has very little zoom..
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Apr 25, 2004
#2
  • Apr 25, 2004
  • #2
MPH for each please...

my time in my sig I went 8.26 on a 1.78 60' ay 83.47 mph
I always analyse my 1/8, it tells you so much about your pass and how well you are shifting.
 

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
Apr 25, 2004
#3
  • Apr 25, 2004
  • #3
This was midnight madness and they dont give out slips so I can only guess the MPH. The motor run was around 82MPH and the nitrous pulls was probably in the 89 to 90 MPH range as earlier it went an 8.04 at 89mph before they started the no time slip BS.
 

Stump1000

New Member
Apr 5, 2003
495
0
0
Morristown Tn
Apr 25, 2004
#4
  • Apr 25, 2004
  • #4
Your mph seems high for the ET. Do you let off the gas to shift? I wanna see some pics. I run 8.14 @ 84mph with 1.75 '60
 

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
Apr 25, 2004
#5
  • Apr 25, 2004
  • #5
Stump1000 said:
Your mph seems high for the ET. Do you let off the gas to shift? I wanna see some pics. I run 8.14 @ 84mph with 1.75 '60
Click to expand...

What mods do you have?? I was looking to going to the track with my new mods and i was hoping i could run under an 8.8 do u think its possible???


Nick
 

Stump1000

New Member
Apr 5, 2003
495
0
0
Morristown Tn
Apr 25, 2004
#6
  • Apr 25, 2004
  • #6
What kind of tires are you gonna run? If you run some slicks or good DR's im sure you can run better than 8.80. My car was all stock except a gear and nitrous.
 

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
Apr 25, 2004
#7
  • Apr 25, 2004
  • #7
Stump1000 said:
What kind of tires are you gonna run? If you run some slicks or good DR's im sure you can run better than 8.80. My car was all stock except a gear and nitrous.
Click to expand...

Prolly just street tires with low pressure and the front swaybar off and im gonna get the spare and the speaker and everything out of it
 

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
Apr 25, 2004
#8
  • Apr 25, 2004
  • #8
Stump1000 said:
Your mph seems high for the ET. Do you let off the gas to shift? I wanna see some pics. I run 8.14 @ 84mph with 1.75 '60
Click to expand...

Yes I let off the gas when I shift, not to sure of my self with the whole power shifting thing with 170k on the tranny.

This car has always MPHed pretty high, back when I first got it I took it to the track with just full MAC exhaust, pullies and timing to 14* the car ran a 13.58 at 102.6. As it is right now it runs a 13.3 at 104 to 105 mph. Last night on the 1.60 60' it still was spinning a bit probably about 5 to 6 feet.
 

Badlilstang

Founding Member
Feb 21, 2001
1,606
0
37
Spring , Texas
Apr 25, 2004
#9
  • Apr 25, 2004
  • #9
6" of air in an SN95?? My car must not transfer for sheet. I ran 7.66 @ 90.79mph with a 1.68 60'. I dont think I even got the tires off the ground at all. Here again im all motor and Nitrous likes to make a lot of tq.
 

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
Apr 25, 2004
#10
  • Apr 25, 2004
  • #10
I could not believe it either but this track "Hooks like velcro". My buddies 92 coupe witha 306 pulls the tires n/a and runs 7.9 to 7.8's.
 

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
Apr 25, 2004
#11
  • Apr 25, 2004
  • #11
Oh yea onhe other key thing I forgot to mention is the fact that I installed new uppers and lowers, and lakewoods at all four corners.
 
F

FEESER 94 COBRA

New Member
Mar 5, 2004
142
0
0
Apr 25, 2004
#12
  • Apr 25, 2004
  • #12
my 1/8 8.10 mph 87.69 60ft 1.90 radial tires 150 hp nos
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
9
1/8th Mile Time?
  • 93lx308
  • Jan 12, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
8K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2018
RangerJoe
NEW FOX IMPUT/ADVICE
  • Madness7645
  • Jun 22, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 25, 2020
Madness7645
Ford Dealership in PA Selling 2019GT Blown with 750HP at $39,999
  • VibrantRedGT
  • Nov 9, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2018
MrBottleneck
M
J
1/4 Help Please
  • jon94vert
  • Sep 21, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2016
mikestang63
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?