new best n/a

Ruckus46Gt · Nov 10, 2006

well ran a new best today dispite having issues with it. Car just didnt want to go into 3rd. Once i got home i messed around with it and it went in nicely. Guess the tranny was just to cold from sitting between runs. Also didnt get to dial in the suspension as well as i wanted to. I think it have a 1.58 in it.
anyways best run was
60' 1.66
1/4 12.45
mph 108.66
new best 1/4 and mph. Also had a couple 3 1.64 60's which is a new best also

i'll get some videos up later on

Yellow2002GT · Nov 10, 2006

What was your best time with Drag Radials......? Mine is 1.68 with 17's up front and stock cams.....12.72 1/2 time @ 106......Auto.......been wanting to run some better tires with skinnies.......how much of a difference does it make?

"ED"

Jackie Chan · Nov 10, 2006

i still think you need to get that on a dyno with a great tuner. there should be 110+ mph traps in your car. nice runs though.

96BlueStangGT · Nov 10, 2006

Nice times, I'm guessing you have cams. That's still fast though.

Ruckus46Gt · Nov 11, 2006

Jackie Chan said:
i still think you need to get that on a dyno with a great tuner. there should be 110+ mph traps in your car. nice runs though.

yea i agree the car does mph low. I've been putting off a dyno tune until i get a couple more things for the car. I know for my af at 6k is right at 13.0 but from 3,500 to like 5k ish my a/f is down in the high 11s liek 11.7-11.9. I only have a predator tune in there.

DaNd4Speed · Nov 11, 2006

Nice launch! I do see you're able to get front wheels off the ground. Man I'd kill to get a 1.66 60'.

OV10stang · Nov 11, 2006

Nice run! Great 60ft! Let me know what your dyno #'s are when you get a chance to get on the rollers...

Ruckus46Gt · Nov 11, 2006

last time on the rollers the car put down 298/312, if i pulled it again it would be less due to the 4.30 gears

steveb24 · Nov 11, 2006

Ruckus46Gt said:
last time on the rollers the car put down 298/312, if i pulled it again it would be less due to the 4.30 gears

what kind of cams do u have?

Ruckus46Gt · Nov 11, 2006

vt stage 2 cams

steveb24 · Nov 12, 2006

do you have any head work done or plans of having some p/p heads installed? your times are great man, all the suspension work is paying off i guess

Ruckus46Gt · Nov 12, 2006

no head work as of now. Hopefully after basic i'm going to add heads, custom cams, and a p51. Then its time to start saving for a forged bottom end with decent compression and coated for spray

CobraRed_96_GT · Nov 12, 2006

Ruckus46Gt said:
no head work as of now. Hopefully after basic i'm going to add heads, custom cams, and a p51. Then its time to start saving for a forged bottom end with decent compression and coated for spray

i hate you

Ruckus46Gt · Nov 12, 2006

CobraRed_96_GT said:
i hate you

lol...car has come a long way

time slip#14

uhoh5.0 · Nov 12, 2006

Great times man!!! I am curious as to what your "race weight" is with driver and what mods you have done to the car? What is the secret to a good suspension set-up?

Ruckus46Gt · Nov 13, 2006

with me in it the car is about 3290. As far as secret to a good suspension set up i have no clue. I just used stuff people recommended. Hopefully soon switching to drag spec struts up front, but not sure car seems to be transfering good enough

new best n/a

Ruckus46Gt

Member

Attachments

Yellow2002GT

New Member

Jackie Chan

I didn't read this.

96BlueStangGT

Member

Ruckus46Gt

Member

DaNd4Speed

OV10stang

Member

Ruckus46Gt

Member

steveb24

New Member

Ruckus46Gt

Member

steveb24

New Member

Ruckus46Gt

Member

CobraRed_96_GT

Active Member

Ruckus46Gt

Member

Attachments

uhoh5.0

Ruckus46Gt

Member

Similar threads

new best n/a

Member

Attachments

New Member

I didn't read this.

Member

Member

Member

Member

New Member

Member

New Member

Member

Active Member

Member

Attachments

Member

Similar threads

Privacy & Transparency

Privacy & Transparency