New best of 11.37 in cool air

04_snake · Sep 19, 2005

I bested my 60ft, 1/8 ET and 1/4 ET marks, this the second trip to the track after swapping in my new 4.10's.

I made three runs 11.45, 11.37 solo qual run because someone died in the lane next to me as I was rolling up and a 11.43 first round elim loss, hitting the brakes hard with a 1/2 car lead to the line on the guy I was racing, but because I broke out (11.50 dial) worse than the other guy, I lost. Still have yet to put together the perfect pass with the new gears, I think it still has more in it with the cool air. Now instead of the occasional bog when I dump the clutch, I now have a little wheel spin as it bites, just gunna need a little practice and some different air pressures and who knows a 1.5x 60 ft with the stock IRS. That's just sick, considering some guys spend 2-3K modifying the IRS so it will launch??

not bad for just a pulley and, a "few" bolt-ons, comments?

here was the whole day for me, the movies will be done tomorrow, if anyone wants to watch from the shotgun seat:
All three timeslips

Juice33 · Sep 19, 2005

Wow! great time! Do you have drag radials? I will be at LV in a month, and I need tires and to put on my IRS brace.

How did you launch it? Is it easier to run with those gears?

I have a 2.8, tune, catback, & intake. I am at 466 rwhp 474 rwtq. I just want to hit low 12s if traction is possible.

04_snake · Sep 20, 2005

Juice33 said:
Wow! great time! Do you have drag radials? I will be at LV in a month, and I need tires and to put on my IRS brace.

How did you launch it? Is it easier to run with those gears?

I have a 2.8, tune, catback, & intake. I am at 466 rwhp 474 rwtq. I just want to hit low 12s if traction is possible.

No I run MT ET Streets (DOT Legal) slicks. You can watch how I launch tomorrow when I upload the in-car movie, I'll post a link in this thread. I don't have a stock clutch anymore, so I can dump it 4 to 6K, depending on the track condition. I think I have to dump under 5,500 with the new gears or it brakes the tires loose just a bit, I have to start over figuring that out. You are going to the SVTOA rental, I'll proly see you there.

you got an upper only, non-ported eaton, like me. I went 12.2 in mine in the spring with the stock F1's and the stock clutch, you can do it but it would be easier if you got yourself a softer set of meats, mighty tricky getting it going with hard rubber on it.

Juice33 · Sep 20, 2005

I definately need some Nittos, 315s. I am not sure which ones though, all I know is 555 extremes, but evne then they have different models for drag or road racing I think. I need to figure this out quick.

I am going for the XX tuning/LMMC track day. I was thinking about the SVTOA day, but I dont want to kill my car.

04_snake · Sep 20, 2005

New in-car movies

Car is working great with the new 4.10's, here are the in-car movies I made from the two qual runs so you can watch how I launch, the tach is in plain view:

11.45 early qual run, track was drying and I took it easy

11.375 new quick ET for me but no where near perfect

comments on the movies, my driving or whatever are always appreciated.

Juice33 · Sep 20, 2005

Wow! That secong run was nuts. The launch was incredible. Congrats bro.

Juice33 · Sep 20, 2005

What were you running before the 4.10s?

04_snake · Sep 20, 2005

Juice33 said:
What were you running before the 4.10s?

The stock 3.55's, I only have 7k on the car so I've only had a chance to change parts once, so far. LOL!

Juice33 · Sep 21, 2005

Soory, I should have been more clear. lol.
I meant what times were you running before the swap.

04_snake · Sep 21, 2005

Juice33 said:
Soory, I should have been more clear. lol.
I meant what times were you running before the swap.

Ahh, nope I'm the retart.. duhh.

I got down to 11.41 running thru the traps around 5200 rpm, but I think I was near the bottom of the barrel, two runs to the track w the 4.10's and i have an 11.3 but I can feel there is more in there and once I put a run together with three perfect shifts, on a sticky track with the right launch, who knows how low I will go. I am hoping for 11 teens before this season is over and so far I have done better with this ride then I ever imagined and have smashed any goal I set for myself so with the 4.10's it can only get better. At the start for example I now have the leverage with the tall gear to experiment with a little controlled wheel spin off the line to see if it will improve my 60 fts, before it was bog or no bog, spin wasn't an option with the 3.55's and the ET Streets.

Dr. Wu 2000 · Sep 21, 2005

Loved the video. That's the way to flog theses things.

marcus95 · Sep 21, 2005

Great times. Keep up the good work. Jesus himself must be holding your half shafts together. That's awesome.

Juice33 · Sep 21, 2005

11.41 is pretty nice!

How do you like the 4.10 on the highway?

Dr. Wu 2000 · Sep 22, 2005

marcus95 said:
Great times. Keep up the good work. Jesus himself must be holding your half shafts together. That's awesome.

I gotta think he has atleast Level 2's, if not 5's.

04_snake · Sep 22, 2005

Juice33 said:
11.41 is pretty nice!

How do you like the 4.10 on the highway?

11.41 is nice, 11.375 is better, but last night in the cool air and with the 4.10's I made 3 runs, everyone quicker (ET) and FASTER (MPH) than I had done before. 11.30@121.90, 11.370@121.78 and 11.359@122.10

the 4.10's work fine on the highway, I actually use 6th gear now and I never used to shift out of 5th until like 75. The 4.10's should have been standard equiptment on every terminator, FORD was just trying to please the EPA and avoid special gas-guzzler classification. Like just about everything on forums it is a popularity contest, all the guys that say "Don't switch to the 4.10's, they are too much gear" are guys with the stock gears, how the heck do they know if they haven't tried them? Every guy who I asked who actually had done the gear swap, granted many are drag strip guys, all said "Get the gear!", so I listened to the guys who did, not the guys that talk like they know but who were afraid to try them for whatever reason.

Dr. Wu 2000 said:
I gotta think he has atleast Level 2's, if not 5's.

"stock" IRS includes the half-shafts, I have not changed the 1/2 shafts and now have around 150 passes on them. I planned to change them if they broke this summer, but they didn't. I will be switching to the level-2's this winter.

Gripstang · Sep 22, 2005

04_snake said:
comments on the movies, my driving or whatever are always appreciated.

Its not like Ill stop comming to SN if you stop posting vids but it will be a sad day. Great as usual keep it up.

Juice33 · Sep 23, 2005

Hmmm, the 4.10s are interesting me very much, thanks to you. Great! More money to spend on the car.

Doc GTO · Sep 25, 2005

Congrats on the new PB. Hooks hard with those MT ET drags!

Dr. Wu 2000 · Sep 26, 2005

I was thinking of getting some gears, some 3.90's. Now I am maybe leaning towards the 4.10's.

New best of 11.37 in cool air

04_snake

New Member

Juice33

New Member

04_snake

New Member

Juice33

New Member

04_snake

New Member

Juice33

New Member

Juice33

New Member

04_snake

New Member

Juice33

New Member

04_snake

New Member

Dr. Wu 2000

New Member

marcus95

Active Member

Juice33

New Member

Dr. Wu 2000

New Member

04_snake

New Member

Gripstang

Juice33

New Member

Doc GTO

Member

Dr. Wu 2000

New Member

Similar threads

New best of 11.37 in cool air

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency