New bullit wheels on 67

I didn't know they made a mustang II front with 4 bolt...If you have an inline 6, then you need a set of 5 lug disc or drums. You really need to give us a little more info. If you want bullitts off an 04, you need 5 lug, and I didn't think the MII was a 4 lug. Someone back me up with the correct info here..sorry

MII stock was 4 lug, but everyone swaps to different rotors when they perform the MII swap. That should pretty much be all for the 5 lug part. The Bullitt wheels will require wheel adapters but I have no idea what size adapter you'd need though.

you need to order 1" wheel spacers/adapters off ebay ($140)

If you have 4 lug, I suggest swapping to 5 lug. The cheapest way to do this is to find an early model donor car in a junkyard. You will need the axles, drums, spindles, etc.

However, we really do need a little more info

how can you bump this when all three responses asked for more information.

Are you going to run a M2 front end with a 4bolt? Is that even right that they have an M2 front end with a 4bolt? Do you have a 4bolt or 5 bolt front end now?

What information do you want?

If you have an M2 front end with a 4lug rotor ....you have two options...change to a 5 lug rotor from an M2 front end or use a late model donor car. You can order wheel adapters...1" thick on ebay. If you want to retain your 4lug wheels, you can order the adapter with your 4lug bolt patter that will adapt and allow you to bolt a 5x4.5 lug pattern wheel on your car (late model bullets)

They are $140 for a set of 4. Its up to you if you want to keep 4 lug or convert to 5lug. Converting to 5lug is not going to be cheap and you will still have to buy wheel adapters. Its up to you.

67cody said:

bump

Click to expand...