Hey I have a 01 Mustang GT that I just bought not long time ago. It had bullit (not sure if thats exactly the one) Clutch cable, firewall adjuster, and quadrant with the 3 hooks. Well my old cable snapped, so I ordered a new one from JEGS. I installed everything today, but my clutch pedal is really hard to push. Anyone know is there anyway to adjust this? Maybe I should adjust the quadrant? Any ideas r welcome.
New clutch cable!?!
- Thread starter VrySlow01GT
- Start date
was it hard to push before with the old cable?
most likely you have a problem with the clutch fork and pivot ball, what happens is the pivot ball wears down, when you take it apart you will see grooves in the ball.
well now the bad news. if it is the pivot ball and clutch fork the trans needs to be removed to replace them.
most likely you have a problem with the clutch fork and pivot ball, what happens is the pivot ball wears down, when you take it apart you will see grooves in the ball.
well now the bad news. if it is the pivot ball and clutch fork the trans needs to be removed to replace them.
Similar threads
