• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

New Clutch Possible Problem

  • Thread starter Thread starter snoboardcore
  • Start date Start date May 21, 2006
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
May 21, 2006
#1
  • May 21, 2006
  • #1
Hey guys just installed a spec stage 3 clutch kit with a spec flywheel in my car. Everytime i go to leave the a light from an idle the car gets wheel hop and chirps the tires a couple of times is this right? Thers no slipping in the clutch at all. Could this be because it is a race type clutch and its a six puck? or because i have 3.55's so theres a little more resistance to get the car moving? Any ideas on what it could be or if its just the way it is. Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 21, 2006
#2
  • May 21, 2006
  • #2
The nature of that clutch is probably fairly abrupt engagment. Conversely, an organic disk tends to slip a little so it doesnt allow the rear tires to bite as hard when you take off. There are tons of factors, but on a simple level, that would be my hypothesis.

Good luck.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
May 21, 2006
#3
  • May 21, 2006
  • #3
For the most part, the spec 3 is on or off with little or no giggle time in between. It'll loosen up a little bit with ware but don't expect a huge change. The largest change will come from your getting a good feel for it.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 21, 2006
#4
  • May 21, 2006
  • #4
got to love those on off type clutch's when the police are sitting behind you at the light. That was what i found with my CF Dual friction. Mind you as i worn in the clutch it got better. The spec 3 is a more aggressive clutch then the CF so i doubt things are going to change much for you.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
May 22, 2006
#5
  • May 22, 2006
  • #5
2 things.

1. Wheel hop is attributed to you likely having stock rear control arms. Replacing your rear upper and lower control arms should eliminate that wheel hop. You can also replace your quad shocks too. Get a lower arm with polyeurothane at one end, and a spherical bushing at the other.

2. Spec clutches are WAY too much clutch. They're overdesigned POS's. While that on/off feeling is real badass, and feels awesome, you're gonna wreak havoc on your entire driveline. You NEED the clutch to be able to slip a little, or you're gonna start breaking parts, lots of them. I hope you're not running a t5, if you are, baby it with that spec.

best of luck.
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
May 22, 2006
#6
  • May 22, 2006
  • #6
v8only said:
2 things.

1. Wheel hop is attributed to you likely having stock rear control arms. Replacing your rear upper and lower control arms should eliminate that wheel hop. You can also replace your quad shocks too. Get a lower arm with polyeurothane at one end, and a spherical bushing at the other.

2. Spec clutches are WAY too much clutch. They're overdesigned POS's. While that on/off feeling is real badass, and feels awesome, you're gonna wreak havoc on your entire driveline. You NEED the clutch to be able to slip a little, or you're gonna start breaking parts, lots of them. I hope you're not running a t5, if you are, baby it with that spec.

best of luck.
Click to expand...

I dont have stock rear control arms but my quad shocks are removed. I dont really care about breaking parts becuase its not a daily driver and its not the stock t5 either so im not to worried.
 

cobradvm

New Member
Sep 2, 2003
245
1
0
Woodinville, WA
May 23, 2006
#7
  • May 23, 2006
  • #7
Spec stage 2 is a great clutch IMHO - very streetable and supposedly good up to 500 rwtq. Stage 3 as others have said doesn't have great street manners.
 
You must log in or register to reply here.

Similar threads

S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
437
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
183
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
685
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
613
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?