New engine, new leaks

Mattsmustang said:

it runs but pretty rough so how do i smooth it out, i set up the timing using Stinger's site now it just needs tuned a little.

Click to expand...

89lx2.3 said:

check your tps sensor, and IAC. I think there is a really good writeup on this on stingers site... other than that all the same stuff you always hear; plug wires, dist cap, rotor, and correctly gapped plugs (all ford parts). you did put the spout back after you timed, right? that would do it.

ditto what mongoroach said on the leak... if it s oil and coming from the bellhousing its probably a rear main seal (which sucks cause your gonna have to pull it back out and apart to fix).

Click to expand...

QWIKSVO said:

if your running a turbo check the oil feed line on drivers side. the oil will run down the side of the block and drip like a rearmain seal,"right at the bell housing" I have had that problem. hope this helps

Click to expand...