I have a Griggs Racing GR350 race suspension and cambered axle for sale. These pieces were on my 1965 BIW for a while but have been removed. Never received a drivetrain and obviously never driven on. Its a GR350 chassis with cambered axle. The axle and springs are powder coated but have some primer overspray on them that comes off with paint thinner. Fits 1964-1970 Mustangs.
All the parts retail for over $15000. I can palletize and ship via freight. Parts are located at Sears Point (Sonoma) Raceway.
Includes the following:
Front:
K-Member w/Mod Motor/LS mounts
Upper Control Arms
Front Severe-Duty Lower Control Arms
SLA Mini Towers
Front Koni Coil-Over Single Adjustable Shocks
850lb Front Springs
CorteX Racing Radial Drop Spindles and Hubs
Rear:
Cambered 8.8 axle housing w/9" Ends
Moser 31-spline axles
Griggs/Wilwood Rear Brakes (no discs)
Severe-Duty Torque Arm to Fit 8.8" Rear
Rear Koni Coil-Over Single Adjustable Shocks
300lb Rear Springs
Watts Link w/TA Cover
You will need the following pieces to complete the chassis:
Front Shock Tower Brackets
Subframe Connectors
TorqueArm Mount
Rear Upper Shock Mounts
Watts Support
Front Anti-Roll Bar
Bump-Steer Kit
Steering Shaft
Misc. Hardware
$8500 obo
All the parts retail for over $15000. I can palletize and ship via freight. Parts are located at Sears Point (Sonoma) Raceway.
Includes the following:
Front:
K-Member w/Mod Motor/LS mounts
Upper Control Arms
Front Severe-Duty Lower Control Arms
SLA Mini Towers
Front Koni Coil-Over Single Adjustable Shocks
850lb Front Springs
CorteX Racing Radial Drop Spindles and Hubs
Rear:
Cambered 8.8 axle housing w/9" Ends
Moser 31-spline axles
Griggs/Wilwood Rear Brakes (no discs)
Severe-Duty Torque Arm to Fit 8.8" Rear
Rear Koni Coil-Over Single Adjustable Shocks
300lb Rear Springs
Watts Link w/TA Cover
You will need the following pieces to complete the chassis:
Front Shock Tower Brackets
Subframe Connectors
TorqueArm Mount
Rear Upper Shock Mounts
Watts Support
Front Anti-Roll Bar
Bump-Steer Kit
Steering Shaft
Misc. Hardware
$8500 obo