New Radiator and Fan recommendations

T

Tackleberry

New Member

Mar 28, 2006

16

0

0

Lancaster, CA

Apr 7, 2006

#1

• Apr 7, 2006

• #1

Hey all, Quick question: Im looking to replace my stock radiator. What is the best route to take? I currently run a Flexalite 5.0 replacement fan which works well. Will the fan work on a new performance radiator like a Be Cool, Granatelli, or Ford Racing Heavy Duty without having to make a bunch of mods to mount it? If not, which is the best fan to go with? Im looking for good quality in combination with ease of installation. Thanks for the help.

 

W

WLDHRSE

Founding Member

Mar 11, 2001

701

1

19

Elkton, MD

Apr 7, 2006

#2

• Apr 7, 2006

• #2

I kinda like my Afco alum rad. although I have not used it yet. Appears high quality. Fan is up in the air but make it electric and control it with a DCC.

 

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Apr 7, 2006

#3

• Apr 7, 2006

• #3

I am using a 2-core Copper HD rad from the local parts store. This rad is more than I need most of the time. Actually, I think my T-stat may be sticking because once in a while my coolant will hover around 180F (I have a 197F stat).
Even if you buy the 3-core it will be much cheaper than an Al., and nearly as affective. Take the money you save and use it for a good e- fan and controller.

My thoughts
jason

 

T

Tackleberry

New Member

Mar 28, 2006

16

0

0

Lancaster, CA

Apr 8, 2006

#4

• Apr 8, 2006

• #4

Thanks for the advice. I would like to go as inexpensive as possible. The car is old and I have only had it for about a year. It has had two previous owners and I dont know when, if ever the radiator has ever been replaced. I live in the desert and need as much cooling muscle as possible.

Out

 

9

90lxfoxbody

Member

Jan 11, 2006

264

0

16

Apr 8, 2006

#5

• Apr 8, 2006

• #5

i use the flex a lite black magic #175 electric fan kit and an eauminum radiator i bought off ebay from seller dissrad. i'd heard lots of pros and cons for the black magic electric fan, but after about three months i have to say it has worked perfectly for my car. i paid $223 for the radiator and it was a great deal. it's all aluminum tig welded and cools great. good luck with your project.

 

B

blue302stang

New Member

Jan 23, 2006

61

0

0

Apr 8, 2006

#6

• Apr 8, 2006

• #6

I am running a jegs aluminum radiator that slid right into place, and i use the DCC 3018, and it cools amazingly

 

T

Tackleberry

New Member

Mar 28, 2006

16

0

0

Lancaster, CA

Apr 8, 2006

#7

• Apr 8, 2006

• #7

I use the #175 fan as well and I agree that it works well. Did you have to make any mods to get it to fit? I'd like to avoid that.