I was in Ohio on Thompson drag raceway today and I race little bit ( like 14 runs ) and gues what I have better time that last year but I have more mods that last year ) LTs,Pro 5.0 Shifter,Nitto DRs, UCA/LCA, Ported U/L 95 Cobra intake, Kirban Billet Adjustable Fuel Presure Regulator, Walbro 255lph HP, MSD 6A Ignition,Blaster High Vibration Coil , here is my time ,still bad BUT better than before
60ft 2.11
1/8 9.505@??
1/4 [email protected]
my old the best time was
60ft 2.32
1/8 9.70@??
1/4 14.89@93
I know this is still bad tim but weater was bad , 45 F too cold ,Nittos couldn't can do better , but I have bad driveshaft ( balance is off and vibrations on higher speed 80mph +) and tranny maunt is bad too
But I still thinkin something else is wrong , LOW end torque , because when I installed ported U/L 95 Cobra intake I fell that low end is gone , it's more like 4K and up , before if I driving is 2nd on low rpms like 2k and hit gas car gonna move quickly but now it's like dog until reach 3K , meybe something else is bad , meybe ignition or something , I check evetything , no vacum leak, no fuel leak no any kinda leak, plugs are gray , fuel pressure is 39psi with vaccum like attached , but still no low end torque
Here is my other post about "bad" ingition http://forums.stangnet.com/showthread.php?t=450200
PLZ give me your opinions
60ft 2.11
1/8 9.505@??
1/4 [email protected]
my old the best time was
60ft 2.32
1/8 9.70@??
1/4 14.89@93
I know this is still bad tim but weater was bad , 45 F too cold ,Nittos couldn't can do better , but I have bad driveshaft ( balance is off and vibrations on higher speed 80mph +) and tranny maunt is bad too
But I still thinkin something else is wrong , LOW end torque , because when I installed ported U/L 95 Cobra intake I fell that low end is gone , it's more like 4K and up , before if I driving is 2nd on low rpms like 2k and hit gas car gonna move quickly but now it's like dog until reach 3K , meybe something else is bad , meybe ignition or something , I check evetything , no vacum leak, no fuel leak no any kinda leak, plugs are gray , fuel pressure is 39psi with vaccum like attached , but still no low end torque
Here is my other post about "bad" ingition http://forums.stangnet.com/showthread.php?t=450200
PLZ give me your opinions
All I get are oldies 