New to the car modding thing.

OK, so you've decided to improve your 'Stang. I like that. Modding costs money though. Now, I want to warn you that it can add up pretty quick. You can spend $2g's in less than 5 minutes.
So, here is my input.
-An ASP pulley is cheap and effective and you can get one at www.aspracing.com (you will need a different belt with that). This is DIY.
-People argue about cold air intakes if they produce more HP or not, but most have them. Mac is the most popular brand I believe. This is DIY.
-Suspension. If you want a nice handling and looking car you will have to change springs. When you change your springs it is highly recommended to do struts/shocks. Here you have a larger selection of manufacturers. This can be DIY, but you might run into problems if you are inexperienced or not mechanicly inclined.
-Wheels and tires. This will be a performance benefit working great with a modded suspension. Plus, it improves looks.
-Exhaust. This should be done at a shop because you need true dual exhuast which requires welding and cuting of pipes.
-Rear end gears and T-lok. This is one of the better mods as it will give you a better start and have both of your rear wheels spinning. However, this should be done only by a professional. Use only Ford gears and T-lok.
-Engine work. This is where you can experiment (at your own risk). You can take your engine apart and do some machining work. You can also change a few components as in cam and roller rockers. If you are interested in these you can check out www.rpm-mustangs.com

So, that's the basics. All of the above would cost about $3,000+. Enjoy.

intake...go to ebay and get one for $50. there is a lot of controversy on the quality of those, but I have one and it works great. its hte best single $50 i ever threw into it.

A degreaser and a power hose. Some car wash bay's have applications for engine cleaning. Or you can buy some kind of degreaser and try that.

Greensix said:

Ok another question. What is the best way to clean up then engine bay and components short of pulling the engine out? It doesnt seem right to invest in nice shiny new pieces and put em in a engine bay that has nearly 7 years of use. Sticking the garden hose in there just seems like a bad plan offhand.

Click to expand...

I use Simple Green, Engine Degreaser. Works like a charm. Spray the engine when it's cold with water, spray the simple green, let it sit for about 5 mins then wash off. Repeat if necessary.

you can do things two ways preformance or looks unless yu got too much money then one person should be allowed to have... you should get all fayst den makez itz lewkz gewdz