I just wanted to introduce myself. I am new to the board. Not really new to mustangs, (just an old screename) I have a 03 Cobra, and I just recently got a 1993 LX 4 cyl. I got the car for basically nothing, and the body is really clean on it, so I am going for the 8cyl swap. I have a local engine builder, who says he will take a 351w and stroke it to a 383. He suggested that I run a carb, but I prefer fuel injection. He told me with this carb setup it would put me in the 450-475hp range. I am hoping for the same or more with a efi system. I was thinking of using the new Edlebrock VICTOR FORD 5.8L EFI manifold, with a set of Victor Jr heads. My 1st of many questions is can I use a 5.0 computer and harness with this setup. I am guessing that I would go with a 90 or up computer so that I would run a maf. I have heard that alot of the 302 and 351 stuff work well together. I know that I would need a custom tune, especially with bigger injectors and etc. How do you tune a 5.0 computer. I know how they tune 0bd2 computers, does it work the same way? Does this setup seem like it would work. Is there anything else I need to take into consideration? I plan on running a tubular k member, and getting a 8.8 rear for the car, and a tremec 5spd. Thanks for the help, and I am sure I am going to have alot more questions.