• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Nitrous Express Plate Kit

  • Thread starter Thread starter killerstang04
  • Start date Start date May 4, 2005
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 4, 2005
#1
  • May 4, 2005
  • #1
Hey Everybody. Im looking into getting the new NX Ford 4.6 Nitrous Plate Kit. Do any of u all have it? What do you think of it? Where can i get it online, i cant find it anywhere!?! Thanks for your input.
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
May 4, 2005
#2
  • May 4, 2005
  • #2
I don't have the new plate kit but,so far I have heard some
good reviews on it. Nitrous Express is a good choice!
 
2

2kyellowgt

New Member
Feb 10, 2003
224
0
0
Nanuet, NY
May 4, 2005
#3
  • May 4, 2005
  • #3
I have it. I bought it directly from NX becuase no one else had it. I installed it about 2 weeks ago but I havent really used it yet except on the dyno so I can get the car tuned. I am going to get another dyno on friday and that should be my final numbers. I have the 100 shot in right know but I might try the 150 depending on my A/F.

As for the kit I like it, it is your typical plate kit like the old fox body one's. I bought all the safety goodies also, better safe than sorry. There is clearance problems and everything lined right up. The only problem was the car ran extremely lean my 1st dyno, I am not sure if it was the plate that was causing it but I added 30# injectors, a focus pump and the new tune. Which should fix the problem.

Otherwise the plate kit is identical to NX older EFI kits with the obvious addition of the plate.

I will keep you posted on friday afternoon with my new results.
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 4, 2005
#4
  • May 4, 2005
  • #4
2kyellowgt said:
As for the kit I like it, it is your typical plate kit like the old fox body one's. I bought all the safety goodies also, better safe than sorry. There is clearance problems and everything lined right up. The only problem was the car ran extremely lean my 1st dyno, I am not sure if it was the plate that was causing it but I added 30# injectors, a focus pump and the new tune. Which should fix the problem.

Otherwise the plate kit is identical to NX older EFI kits with the obvious addition of the plate.

I will keep you posted on friday afternoon with my new results.
Click to expand...

Thanks man i would appreciate you keeping me posted. I understood the kit
to be a wet nitrous kit, no bigger injectors/fuel pump necessary.?!? I also wasnt aware a tune was needed! Wow, i might be in over my head in the money dept, but its probably well worth it.
BTW: I have a DiabloSport Tuner that can adjust timing/fuel. Is there enough adjustability to safely run say a 100hp shot? Thanks again.
 
2

2kyellowgt

New Member
Feb 10, 2003
224
0
0
Nanuet, NY
May 4, 2005
#5
  • May 4, 2005
  • #5
You actually dont even need to adjust the timing for 100 shot and it would still be safe. I know people that have been running 100 shot stock timing and fuel system, they just and some race fuel to compensate and some colder plugs.

But I think that the diablo tuner should have the ability to adjust everything to the way you need, but you should check with someone else who has one.
 
J

jocko

Member
Oct 1, 2003
62
0
6
miami fl
May 4, 2005
#6
  • May 4, 2005
  • #6
ttt
 
K

killerstang04

New Member
Nov 4, 2004
20
0
0
May 5, 2005
#7
  • May 5, 2005
  • #7
bump.. sorry
 
J

jocko

Member
Oct 1, 2003
62
0
6
miami fl
May 5, 2005
#8
  • May 5, 2005
  • #8
ttt
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
776
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
Drivetrain Tail Shaft bore odd shape
  • R82148V
  • Jun 12, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
141
Fox 5.0 Mustang Tech Jun 13, 2026
Mustang5L5
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Z
91 LX 5.0 Hatchback door striker back plate fell.
  • Zeke1995
  • Jun 20, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
306
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Zeke1995
Z
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
159
SN95 4.6L Mustang Tech Aug 4, 2026
jake411
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?