I am trying to locate a fitting/adapter, to connect my fuel pressure safety switch (Hobbs Switch) to the fuel rail. The schraeder valve must be removed. The threads on the switch are male 1/8" pipe thread, and I'm not sure about the female fuel rail. Anyone know where I can get this fitting. I think it may be a brass block type fitting. Any help is appreciated.
Nitrous~~Fuel pressure safety switch question
- Thread starter MooseCobra94
- Start date
Hef5.0weisen
20+ Year Stangneter 
my switch just threaded right into the fuel rail, the NOS 5115 kit, if not home depot and lowes, stores like that,should have what you're looking for, plumbing section is great to piece stuff like that together, good luck man
94TURBO5 O
New Member
Go to the plumbing section @ HD and you'll see the brass fittings.
GTPhreak
Founding Member
cobra dave
New Member
- Sep 1, 2003
- 308
- 0
- 0
You will not find a NPT fitting that small at any lowes, home depot or wherever. GT PHREAK is right though on the size fitting. I got mine from a local speed shop that ordered it from autometer it was like 7 or $8.
Hardware stores will not carry them. I got mine from Autometer at FFW. You can get them from Summit or Jeg's.
Similar threads
