nitrous on my 95 gt

RacEoHolic330 said:

In a nutshell, a methanol injection system consists of a tank, pump, lines, and a nozzle. The nozzle is placed in the discharge tube before the throttle body. A 50/50 mix of water and methanol is pumped through the nozzle, which sprays the vaporized mixture into the intake manifold. This mixture greatly reduces intake temperature and essentially increases the octane rating of the fuel mixture in the combustion chamber to a race gas level.

The increase in power comes from the ability to add more timing to the engine as boost increases, so a re-tune is required. The lower intake temps and increased timing is the perfect recipe for a lot of extra power. The amount of methanol injected can be controlled via a programmable controller that uses boost pressure to determine how much fluid to inject.

Snow Performance makes some good stuff. I've used their kits with great success in the past. I have some left over parts if you're interested. Rick 91GT is a site sponsor and a vendor for Snow. He'd probably be a good source to get a new kit from.

Click to expand...