Nitrous setup

[1982matthew]

I have a 306 built block, trick flow h/i/c, full exhaust with long tubes, 30lb injectors, 373's and some other stuff... and wanted to get a nitrous kit, i was wondering if anyone else has a simiular setup and what they run. I want a good quality setup with everything i need included with different shot options. Any info is greatly appreciated. Probably over the inter I am going to look into getting a supercharger so I want something that will also work with that.

 

[mustangman9812]

NX is a good kit. I have had a ton of kits and my Favorites are Zex for EFI, NOS, NX. If you have forged bottom-end i would go with atleast a 150hp Shot but make sure you set it up right no matter what kit and shot you go with. A Nitrous kit is only as good as the stuff that has to go with it to make it right

 

[ram360]

you looking for wet or dry? I've had great luck w/ edelbrock and NOS...I hear NX is really good... lifetime warranty on solenoids etc....

 

[PUNISHER RACING]

Edelbrock makes a real nice kit "The Performer RPM" and there Tech is second to none!

 

[1982matthew]

As I hear wet is safer but I truly do not know the difference between them.....and yes the car yes a very well built bottom end.

 

[mustangman9812]

NOS Or NX Wet FTW with at least a 150hp Shot Then

 

[allballsmustang]

i run a compucar wet kit...they have the different nozzles for different shots, they're almost always cheaper than most of the kits out there...they have great warantees on their stuff, and everytime i call them with a question they help me out...

jim

 

[n2o-89fox]

Nx here, with bottle opener and a dyno tune bottle heater paid about 500 total. Best bet is ebay, I got my efi kit unopened for 220 shipped worth 659. My car is probably a little tamer than your and the nitrous numbers are with a 150 shot at 10.8-11.2 af.