TJCrow New Member Jun 6, 2011 8 0 1 Houston, TX May 9, 2012 #1 May 9, 2012 #1 Hey Guys, I recently bought a Zex Window switch. I was wondering where to set the window (on / off) with a 100 shot.
Hey Guys, I recently bought a Zex Window switch. I was wondering where to set the window (on / off) with a 100 shot.
johnnyt03gt 5 Year Member Mar 15, 2008 453 5 29 dallas TX May 10, 2012 #2 May 10, 2012 #2 if you're talking about RPM, on no less then 3.000 rpm off depends on ur setup. around 5500 rpm ,
TJCrow New Member Jun 6, 2011 8 0 1 Houston, TX May 10, 2012 #3 May 10, 2012 #3 What would change the high Rpm? (depends on ur setup. around 5500)
demented22 Member Nov 26, 2011 222 6 18 pittsburgh, pa May 10, 2012 #4 May 10, 2012 #4 I am setting mine at 5500 due to my gears(410). I don't want to hit the rev limiter on the spray
TJCrow New Member Jun 6, 2011 8 0 1 Houston, TX May 11, 2012 #5 May 11, 2012 #5 Can I just change the rev limit or remove it all together with a tunner?
bradfier Member Mar 2, 2010 142 0 16 May 11, 2012 #6 May 11, 2012 #6 Yes you can change the rev limit with a tuner, but why do you want to do that if you spraying? And that is the point of the switch usually set from 3000 to 6000, you may still be making power at 5500rpm just make sure you don't spray at low rpms
Yes you can change the rev limit with a tuner, but why do you want to do that if you spraying? And that is the point of the switch usually set from 3000 to 6000, you may still be making power at 5500rpm just make sure you don't spray at low rpms