I have a question, my brother told me about a nitrous kit that you can use with the 2.6L Kenne Bell SC kit that I have on my '09. Is there a kit out there that I am not aware of?
Nitrous'ed SC Mustang GT
- Thread starter cycosarge
- Start date
Steel Horse
Member
I have never heard of one designed for the Kenne Bell. I'm sure some are out there that you can rig to make work. I hope you have a stout motor because if something goes wrong you are in for a very big boom.
You could use any nitrous kit. why wouldnt you be able to? You mount a tank, run some lines, tap the fuels system if it is a wet kit, mount some solenoids and install the nozzle in your intake.
You could use a Zex kit, NOS, Edlebrock or Nitrous Express. I would keep it to a 75 shot unless you have a forged bottom end.
You could use a Zex kit, NOS, Edlebrock or Nitrous Express. I would keep it to a 75 shot unless you have a forged bottom end.
I have a completely forged assembly, what I am looking at is how a standard nitrous kit would work under the boosted pressures of the intake. As I know you all already know, the Kenne Bell kit comes with a new lower intake/intercooler as well as the blower assebly itself, so the only kit that I could see using would be the injector type that replace your fuel injectors or a wet kit that you spray into the supercharger itself. No way to tune that in my opinion. Tell me if I'm ignorant please. Besides, my brother, who has been building 8 second cars for 20 years, is the one that said the kit exists. I have no idea what he is talking about. I have another question... I have the 2.6L kit and the airflow is weakest at the intake before the supercharger, after the TB. I have seen the 2.8L kit and I am SURE that the mammothfold intake will bolt up, has anybody seen this?
Similar threads
