Engine No Injector pulse on 7 and 8 cylinder

I had been looking at the diagram for the 92 thinking that 91-95 were the same then I just happened to look at a 94 injector diagram and noticed the difference so I tested pin 35 and 39 that were empty and they both pulsed so I took the wires out of pins 42 and 52 which were cylinder 7 and 8 moved them to pins 35 and 39 and I had all 8 pulsing. I just need to move them all to the correct sequence and I'll be done....
I was about to post up and tell you this. This was a common issue back in the 90s when it was popular to swap an A9L into a 94/5 for power. Guys wouldn't swap these pins and have similar issues. Glad you found it.
 
  • Sponsors (?)