• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

No spark please help!!!

  • Thread starter Thread starter mustang88
  • Start date Start date Oct 30, 2005
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 30, 2005
#1
  • Oct 30, 2005
  • #1
fuel pump turns on but no spark anywhere none from coil either. i hooked up a tach wrong i think(hooked tach green wire to the module clip wire that was green with yellow stripe not knowing i was supposed to connect to coil neg wire instead) no spark anywhere, i dont know what is wrong now, could it be i need a new module or could it be the eec power relay??? i need the car to be running soon due to i ordered a mass air conversion harness and need to install it. help soon please
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
Oct 30, 2005
#2
  • Oct 30, 2005
  • #2
did this happen right after you installed the tach?
 
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 30, 2005
#3
  • Oct 30, 2005
  • #3
yeah after i installed it it wouldnt start ,i then uninstalled it and the wires are back to normal.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 30, 2005
#4
  • Oct 30, 2005
  • #4
Did you answer the questions on your other thread? If your FP primes, your EEC relay works.

Good luck.
 
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 30, 2005
#5
  • Oct 30, 2005
  • #5
ok good so maybe its the module? im goin to junk yard tommarow and gunna get everything it could possibly be. what else could it be

oh the first wire i hooked tach to was pip out i found out,car still ran, then came the coil neg wire near distibuter
 

jadedinpa

Founding Member
Aug 2, 2002
1,094
0
0
lancaster, pa
Oct 30, 2005
#6
  • Oct 30, 2005
  • #6
most likely it's the TFI module, on the side of the dizzy. second would be the pip sensor in the dizzy. third would be the computer.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 30, 2005
#7
  • Oct 30, 2005
  • #7
If you hooked to the PIP, it is VERY easy to fry it (it happens during resistance testing all the time). Once again, if you DONT have injector pulsing, that endorses the PIP being gone. If you do have injector pulsing, your PIP should be fine.

I would NOT go unsystematically tossing parts at it. All you do is create more variables. Spend a few mins diagnosing things.

Just my two cents. good luck.
 
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 30, 2005
#8
  • Oct 30, 2005
  • #8
opened up the module and what did i see? looked like some black stuff in the back corner i beleive and one of the wire things have black on it. guessing it to be fried
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
299
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
682
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
392
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
M
Need help please
  • Mikey62666
  • Oct 12, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
131
2005 - 2014 S-197 Mustang -General/Talk- Oct 14, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?