• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

No Turn Signals!! Help!!

  • Thread starter Thread starter 5.0frank
  • Start date Start date Jul 25, 2006
5

5.0frank

New Member
Dec 13, 2001
13
0
0
Jul 25, 2006
#1
  • Jul 25, 2006
  • #1
Hi Everyone. I got a wierd problem with my 89 GT. The turn signals won't work nor the backup lights. I have replaced the flasher, the master function switch, and the fuse. After all that I bought a test light and tested the positive wire going to the fuse and I got no power. I think it might be a fusible link, but I have no idea where they are on my car. Does anyone have a clue as to where they are or what it is. Also, they stopped working when I was driving home at night and all the lights blinked and then went off. I stopped the car and waited a bit and the headlights worked but not the turn signals anymore.

Hope someone can help me.
 

Jkstang78

Founding Member
Oct 14, 2002
1,510
1
38
long island N.Y.
Jul 25, 2006
#2
  • Jul 25, 2006
  • #2
Ok well since you checked all the things I was going to say, there is one more thing to check. The Ground wires. Look under the dash with a flashlight and there might be a loose ground wire somewhere.

Any fusable links I have seen have been up front in the engine bay.
 

stangjunkie

New Member
Nov 15, 2004
381
0
0
Jul 25, 2006
#3
  • Jul 25, 2006
  • #3
get a chiltons manual or poke around online you should be able to find the wiring diagrams for these
 
5

5.0frank

New Member
Dec 13, 2001
13
0
0
Jul 25, 2006
#4
  • Jul 25, 2006
  • #4
I got the Chilton's manual, but it did not help me one bit in finding the problem. I look online for some more info. If anyone else has an idea of what it might be please let me know. Also, I do not think it is a ground because there is no power going to the positive side of the fuse, when I ground to the body.
 
R

rigamaroles

New Member
Jun 27, 2005
0
0
0
British Columbia
Jul 25, 2006
#5
  • Jul 25, 2006
  • #5
There was a recall on the factory ignition switches in 1989 and mine went out on me and caused the same thing. I'd just replace your ignition switch, should work right away
 
You must log in or register to reply here.

Similar threads

A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
144
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
Fox Turn signal flasher keeps failing
  • keel
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
366
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2026
Noobz347
8
Electrical Turn Signal / Lights Issue
  • 86SilverFox
  • Jun 2, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
557
Fox 5.0 Mustang Tech Jun 3, 2025
General karthief
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
282
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
2000xp8
T
Inside is completely dead
  • TunaCar
  • Oct 18, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
363
SN95 4.6L Mustang Tech Oct 20, 2026
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?