Noisy Valvetrain??

Its semi-common for them to be noisy...I'd drive it some to get em all pumped up good, then pull it in and whip the upper off and re-do em...

some say to put 500 miles or so on and they can/will/do calm down some?? Depends on how noisy they are...Mine would do the same thing, when driving i could hear the valvetrain bouncing off of houses and such....I just re-adjusted em again...it may never be as quiet as stock...thats the price we pay for playing with em....depends on how much it bothers you I guess....
I was even running the stock rockers and it was noisy...i swapped in some Scorpions and it calmed it down some...

your not alone in trying to get the thing stock quiet...it may never get there...

Hope that helps some...

i have them with my e7's, they are designed to be a stock replacement, i used no shims, and have had no trouble. However when i had my heads mille i installed the same .035 shim to match what i had milled off.


jason

glad to hear it. It is nice to be able to go ask questions somewhere and find the answer through somebdoy isn't it. I have only had a couple problems this site hasn't helped me figure out, and those were mainly because you guys on here weren't here to help