Anyone use one of these clusters??? Seems to be a direct plugin. I'm thinking about the blue one.
Nordskog Performance Products
Thanks guys.
Nordskog Performance Products
Thanks guys.
Nordskog Gauge Cluster
- Thread starter 95Vert383AOD
- Start date
I think they're kinda cool. The only thing I don't like is that the tach increases in 100 RPM increments from what I've read about them.
Yeah ive already got an analog style tach./ water temp/ oil pressure by autometer. Personally i would just be buying it for the coolness factor and that i shouldn't be able to bury the needle on a 300mph speedometer.
Car Nut
Founding Member
I've considered swapping the cluster in my 94 GT, but this is the first one I've seen that actually uses the stock wiring harness.
It fits 94-98??? But these clusters are different in regards to the stock wiring, right?
Does anyone know if anything is lost compared to the stock cluster. I've got a bad fuel guage, so I've been thinking about getting a used one. I like the tire size calibration thing too.
I'm guessing logic says the guages on this cluster would be no more accurate than the stock cluster or am I wrong?
Not cheap, but intersting.
It fits 94-98??? But these clusters are different in regards to the stock wiring, right?
Does anyone know if anything is lost compared to the stock cluster. I've got a bad fuel guage, so I've been thinking about getting a used one. I like the tire size calibration thing too.
I'm guessing logic says the guages on this cluster would be no more accurate than the stock cluster or am I wrong?
Not cheap, but intersting.
Car Nut
Founding Member
I just read the installation instructions for the 94-98 unit.....
This is not a direct plug-in unit. You'll have to take the stock cluster all apart, undo all the wires from the stock connect, and finish off by putting various parts/wire connections on the new cluster.
If I'm wrong, then maybe someone has this cluster personally and can testify what is up.
This is not a direct plug-in unit. You'll have to take the stock cluster all apart, undo all the wires from the stock connect, and finish off by putting various parts/wire connections on the new cluster.
If I'm wrong, then maybe someone has this cluster personally and can testify what is up.
I think the only difference between the 94-95 and 96-98 clusters is the odometer. This doesn't have an odometer. i don't think they changed anything as far as the sending units for the fuel/ Speedometer/ oil pressure/ water temp/ the tach and voltage doesn't need a sending unit.(Obviously) If this has detailed instructions as far as what wires go where i see this as a fun Saturday project.
99FiveOh
15 Year Member
Damn! Weren't these things like 300 bucks a couple years ago?
A buddy of mine had one in his 87GT, but he said it was a wiring nightmare and he would never attempt to do it himself. It was already installed when he bought the car.
A buddy of mine had one in his 87GT, but he said it was a wiring nightmare and he would never attempt to do it himself. It was already installed when he bought the car.
Similar threads
