nos intallation question.

jmir018 · May 25, 2005

nos installation question.

i will be installing a wet nx system on my 5.0 this weekend.
Everything seems pretty straight forward. the only thing i am having trouble figuring out is the position of the woot switch on the tb.
Can anyone post a pic of their current set up so i can use it as a guide?
thanks a lot.
Jersey

z9_87 · May 26, 2005

Do you mean the Throttle Position Sensor? If you look at your TB on the opposite side of where the gas pedal's cables connect to the TB is where the TPS is.

Scorcher2005 · May 26, 2005

no, he means the wot switch. i have nitrous and had a bit of trouble figureing out how to mount it. ill take a pic when i get home (im at school now) and try and post it up for you. The only difference is that mine is a NOS dry kit. But the switch should be fairly the same.

jmir018 · May 27, 2005

thanks a lot. a picture will help a lot since i still can't figure this out.

Stang8URMPRT · May 27, 2005

Just fab up a bracket out of some aluminum, bend it, drill a couple holes and mount it up. Shouldn't be too hard. I bought a direct bolt on bracket + WOT switch from Edelbrock and it bolted right on... Of course, this was for my carbed 83...

Scorcher2005 · May 27, 2005

here ya go. i posted the pics up on my car domain site. Hope these help. http://www.cardomain.com/memberpage/610425/4

jmir018 · May 27, 2005

freaking brilliant, could you please leave that site up until tomorrow.
i am on my way to work right now and won't come back until early in the morning.
thanks.
Jerset

Scorcher2005 · May 27, 2005

alrighty

Scorcher2005 · May 28, 2005

you get that installed yet?

Michael Yount · May 29, 2005

Seems like it would easier/more effective to use a switch that simply reads the tps voltage....you already have a 'wide open throttle switch' in the form of the tps sensor - that's what the ecu uses.

Scorcher2005 · May 29, 2005

yeah, but people just generally use what the kit comes with. Well, at least me.

Michael Yount · May 29, 2005

Why settle for an inferior approach? I'm sure you'll work out an acceptable mount - good luck!

nos intallation question.

jmir018

z9_87

New Member

Scorcher2005

Member

jmir018

Stang8URMPRT

Active Member

Scorcher2005

Member

jmir018

Scorcher2005

Member

Scorcher2005

Member

Michael Yount

Mustang Master

Scorcher2005

Member

Michael Yount

Mustang Master

Similar threads

nos intallation question.

New Member

Member

Active Member

Member

Member

Member

Mustang Master

Member

Mustang Master

Similar threads

Privacy & Transparency

Privacy & Transparency