Now what do i need

[BlueOvalStangGT]

Hey i picked up a used cobra manifold today but now i need to know what gaskets i need. All i have is the manifold(upper and lower) and the egr, what else do i need to put this on my GT

 

[1105]

You will need an upper to lower gasket, and a lower intake gaskets. I got to reuse my stock EGR gasket, and made my own TB to intake gasket (used a roll of gasket material and cut it out of that)

I feel like I'm forgetting something but I think thats about all your need besides some tools and RTV.

 

[viperos]

to be sure, just call a ford dealership parts department... they can look it up for you while you're on the phone, and even order it, although you will pay 2x too much...

 

[Joes95GT]

to be sure, just call a ford dealership parts department... they can look it up for you while you're on the phone, and even order it, although you will pay 2x too much...

It's not that bad. They should always have the upper-to-lower gaskets and the lower manifold gaskets because they are the same on the Cobra as they are on the 5.0 Explorers. I think it's like 20 bucks for the lowers and 15 for the upper to lower, but I wouldn't swear by it.

Joe

 

[viperos]

that sounds about right... I was just saying, make sure you get the right gasket...

 

[BlueOvalStangGT]

what about bolts?

 

[viperos]

once again, call ford, they will know everything you want to know...

 

[RIO5.0]

Fel-Pro...MS93334....This is the kit with the Blue end seals...and the head the lower gaskets...they equal the fel-pro 1250 gasket....

Get the bolt kit from Summit or FRPP...Its like 9.00...M6002-A50 is the kit number...

I never had any luck scoring the TB or EGR gaskets...I just make my own...

http://members.pro3i.com/forums/showthread.php?t=407172

 

[BlueOvalStangGT]

thanks alot rio,

 

[BlueOvalStangGT]

hey rio, i found the parts on FRPP, but i can't find them on summit, do you have any more part numbers?

 

[Joes95GT]

Those part numbers are on Summit because I just scored the same bolt set about 3 months ago.

Joe

 

[rockin_rick]

hey rio, i found the parts on FRPP, but i can't find them on summit, do you have any more part numbers?

Summit:
FMS-M6002A50
$6.88
In stock

Rick

 

[RIO5.0]

hey rio, i found the parts on FRPP, but i can't find them on summit, do you have any more part numbers?

The MS93334 is Fel-Pro's number...Any parts place that carries their stuff should have it...its common to all 5.0s...minus the u/l gasket, its for the stock intake...you have the GT40 U/L gasket needed anyway...
I don't have Summits catalog handy....it may be in that section listing all the fel-pro stuff ??? I always get the kit local...

 

[rockin_rick]

The MS93334 is part #FEL-MS93334. $14.99 in stock.

 

[BlueOvalStangGT]

THANKS ALOT FELLOW STANGNET MEMBERS, PARTS PURCHASED SUCCESFULLY! (only had to pay $10.32 total,)