• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Odd chirping noise

  • Thread starter Thread starter PeteyAce
  • Start date Start date Nov 10, 2005

PeteyAce

Member
Jul 2, 2004
346
0
17
Nov 10, 2005
#1
  • Nov 10, 2005
  • #1
car makes astrage chirping niose when ever i turn on the heat while driving, but when i step on the clutch the chirping stops, and the faster i go the faster the chirping is, its annoying the crap out of me
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Nov 10, 2005
#2
  • Nov 10, 2005
  • #2
Never heard of that one... Are you sure there isn't a bird in the blower motor? (sorry)

What mode do you have the vent selector in? Does it do it in all modes?

When you unload the engine from the rest of the driveline it stops making a noise... I am stumped.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 10, 2005
#3
  • Nov 10, 2005
  • #3
So the noise only occurs when the HVAC blower motor is on AND the clutch pedal is depressed? That is too goofy.



You should be able to play around with the fan and the clutch pedal while driving to narrow it down.

Good luck.
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
Nov 10, 2005
#4
  • Nov 10, 2005
  • #4
Sounds kinda like your throw-out bearing, except for the part about the heat having to be on. Weird
 

PeteyAce

Member
Jul 2, 2004
346
0
17
Nov 11, 2005
#5
  • Nov 11, 2005
  • #5
take it back with the heat thing, just drove and it did it without the heat being on, and when the engine is revved it gets louder and quicker, im thinkin belt?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 11, 2005
#6
  • Nov 11, 2005
  • #6
If the noise subsides when lightly pressing the clutch pedal, I would lean toward the TOB.

If you think belt, you can remove it and let it idle or rev it up (VERY BRIEFLY, on a not hot motor) and see if the noise subsides. I kinda doubt it is the belt.

Good luck.
 
You must log in or register to reply here.

Similar threads

Electrical MSD Blaster TFI Coil 8227 loud Chirping Noise.
  • PonyGTrider
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
2K
Fox 5.0 Mustang Tech May 31, 2025
PonyGTrider
B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
338
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
273
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
396
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?