• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Oil coming out of breather?

  • Thread starter Thread starter Kevin R.
  • Start date Start date Mar 21, 2006

Kevin R.

New Member
Jun 3, 2004
473
0
0
38
Ohio
www.cardomain.com
Mar 21, 2006
#1
  • Mar 21, 2006
  • #1
Is it possible for oil to be slowly accumulating in my breather filter and then dripping out?

I am trying to source an oil leak and that seems to be the only thing in that area. I also periodically see drips of oil on the underside of it.

Could I have that much blowby to come out of the filter?



Thanks
Kevin R
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 21, 2006
#2
  • Mar 21, 2006
  • #2
Kevin R. said:
Is it possible for oil to be slowly accumulating in my breather filter and then dripping out?
Click to expand...
It's definitely possible if there's no baffle under it.
 
J

johnmcgt

New Member
Apr 20, 2003
39
0
0
New Port Richey, FL
Mar 21, 2006
#3
  • Mar 21, 2006
  • #3
I am not sure what you are talking about, I did not think our 94-95's had breather filters?
There is a PVC oil accumulator kit that can be bought or pieced together to solve oil accumulation. Do a search on here for PVC filter or something along that line and should come up with several threads on the subject.

Hope this helps,

John
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Mar 21, 2006
#4
  • Mar 21, 2006
  • #4
Kevin R. said:
Is it possible for oil to be slowly accumulating in my breather filter and then dripping out?

I am trying to source an oil leak and that seems to be the only thing in that area. I also periodically see drips of oil on the underside of it.

Could I have that much blowby to come out of the filter?



Thanks
Kevin R
Click to expand...

Just curious Kevin

I don't see a PA

Why the breather

Grady
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
43
North Carolina
www.xtrememustangs.com
Mar 21, 2006
#5
  • Mar 21, 2006
  • #5
This is why I no longer run a breather. I had problems like this as well. It seems that the only case you might need to is with a PA (as Grady mentioned).



John, what you're referring to is commonly called an "PCV oil seperator" on here ..... and there are several people with them, as well as several write-ups. And I believe you're right there ..... our cars never came with a breather.




Kevin, are you running the stock VC's? How about a seperator?
 
J

johnmcgt

New Member
Apr 20, 2003
39
0
0
New Port Richey, FL
Mar 23, 2006
#6
  • Mar 23, 2006
  • #6
My bad, I had PVC on the brain. I have been fixing sprinkler system in preperation for summer.
Yeah, the seperator is what I was refering to.

Thanks
 

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Mar 23, 2006
#7
  • Mar 23, 2006
  • #7
I think the talk about an oil separator is off topic from the original post. As I understand it, he installed a breather on a Trickflow valve cover. So he may not even have a PCV (some recommend running a breather back there too if you run one on the valve cover). I cant see from the pictures, but do you still have a PCV valve?

As to why there would be oil coming out there, I don't have a clue. When I have posted about breathers recently, many people assured me that air flows into the engine block through the valve cover and out through the PVC (into the intake). So why you would be having oil flow against that airflow is beyond me.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 23, 2006
#8
  • Mar 23, 2006
  • #8
Brad (or Greg when you're undercover. I still feel bad about that), the air will take the path of least resistance, which is often the breather (over a PCV). Additionally, it is quite easy for the modded folks to overload a stock sized PCV; even if the breather was the path of greater resistance, it would be recruited to help out (just like the oil filler to air inlet hose helps vent crankcase vapors at WOT).

Kevin, a closed breather with a remote drain might be an option, though going back to pure PCV might be cool (PCV is active in sucking the chitty vapors out, rather than passively allowing them to ooze out via a breather).

Good luck.
 
You must log in or register to reply here.

Similar threads

J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
272
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
C
Knocking after pull- went away?
  • Connormcclark
  • Oct 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
233
1996 - 2004 SN95 Mustang -General/Talk- Oct 6, 2025
gkomo
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
614
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?