Oil dipstick

M

myfirstii

Founding Member

Feb 28, 2002

401

0

16

chicago,Il.

Jan 28, 2008

#1

• Jan 28, 2008

• #1

I'm having a weird problem. I've noticed that every time I open my hood my dipstick is sticking up a couple inches. At first I thought I just didn't seat it all the way down,but now I know its something else. Has anyone had this problem before? It sounds to me like it might be from to much crankcase pressure, but what would cause that? The car is completely stock besides a Cervinis concept hood.
thanks,
Patrick

 

G

GT in Detroit

New Member

Jul 27, 2005

33

0

0

Jan 29, 2008

#2

• Jan 29, 2008

• #2

does your oil dip stick have the black rubber o-rings installed on it, i could see if they were missing it might be a loose fit..


jim

 

M

myfirstii

Founding Member

Feb 28, 2002

401

0

16

chicago,Il.

Jan 29, 2008

#3

• Jan 29, 2008

• #3

Yes it does...Its a mystery I guess. But there has to be a logical explanation...
Patrick

 

T

tsquare

New Member

Sep 16, 2007

5

0

1

Overland Park, KS

Jan 29, 2008

#4

• Jan 29, 2008

• #4

You might check the PCV valves and lines. I don't know about the current cars, but on some of the older cars if the PCV valve got plugged, or the hose collapsed, the crankcase pressure would push out the oil dipstick.

 

Stangshark

Member

Feb 2, 2008

50

0

6

Indiana

Feb 16, 2008

#5

• Feb 16, 2008

• #5

+1 crankcase pressure

 

M

myfirstii

Founding Member

Feb 28, 2002

401

0

16

chicago,Il.

Feb 16, 2008

#6

• Feb 16, 2008

• #6

That was my first thought to, but I checked and all the lines are good.
Patrick

 

belzebub2u

New Member

Oct 10, 2004

164

0

0

Woodstock GA

Feb 16, 2008

#7

• Feb 16, 2008

• #7

shot in the dark

this was on an older pontiac in my 68 firebird, the motor had a turn down for the dipstick so it would go strait into the oil in the pan. that wore out and feel off into the oil pan (no big deal the screen will keep it out) but with it missing the crank would actually swing around and hit the dipstick and push it out about 2 inches. the way i checked was i took an extra dipstick and cut it in half and ran it, when it didn't pop up, i knew that was the problem