• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Oil leak problem NEED HELP FAST!

  • Thread starter Thread starter 87stang205
  • Start date Start date Jun 2, 2004
8

87stang205

New Member
May 17, 2003
26
0
0
Jun 2, 2004
#1
  • Jun 2, 2004
  • #1
I started noticing a burning smell from the engine compartment and when I checke dit out oil was seeping out of both valve cover breathers and down onto the headers. What would cause oil to be forced out of these. 92 302 notchback with a A-trim vortech 130k miles.
 
8

87stang205

New Member
May 17, 2003
26
0
0
Jun 2, 2004
#2
  • Jun 2, 2004
  • #2
ttt
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
Jun 2, 2004
#3
  • Jun 2, 2004
  • #3
Why do you have valve cover breathers on an EFI car?
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Jun 2, 2004
#4
  • Jun 2, 2004
  • #4
Check to see if your PVC is plugged in snug. (located on back of the lower intake, in the center)
 
B

battyice

New Member
Mar 7, 2004
153
0
0
West Chazy, NY
Jun 2, 2004
#5
  • Jun 2, 2004
  • #5
Sounds to me like you have a lot of crankcase pressure. Check your PCV valve.
 

ECU5.0

Banned
Jan 10, 2004
1,803
1
0
raleigh, nc
Jun 2, 2004
#6
  • Jun 2, 2004
  • #6
dont you get rid of the pvc valve and thats why you have to use breathers to vent the crank shaft. because the air being forced in is just goiing to to right through the pcv valve and right into the crankcase.....someone who has a blower should be able to answer this question pretty easily
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
Jun 2, 2004
#7
  • Jun 2, 2004
  • #7
Yeah too much pressure is about the only way you can have oil spilling out of the breathers. If you are using the breathers as a means of deleting the PCV system then you didn't do something right to counter the provisions. Under what circumstances did this occur? Also, if you still have the PCV system in tact, take a look at it and try to get it functiong again. If you put your finger over the PCV valve and you feel suction, then it is working and doing it's job, if not then replace it.
 

ECU5.0

Banned
Jan 10, 2004
1,803
1
0
raleigh, nc
Jun 2, 2004
#8
  • Jun 2, 2004
  • #8
hes running a blower and with the pcv valve hooked up its not gonna suck...its gonna blow air into the crankcase...im pretty sure anyways
 
8

87stang205

New Member
May 17, 2003
26
0
0
Jun 3, 2004
#9
  • Jun 3, 2004
  • #9
I found the pcv in the rear of the bottom intake manifold was unplugged, plugged it back in a I believe my problem is solved. Thanks guys
 
You must log in or register to reply here.

Similar threads

Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
379
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
SBF rebuild with no oil pressure NEED HELP
  • Falcon67
  • May 27, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
319
1965 - 1973 Classic Mustangs -General/Talk- May 27, 2025
horse sence
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
683
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
L
Engine Need help diagnosing 2 dead cylinders
  • lvgnmz
  • Feb 13, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
465
Fox 5.0 Mustang Tech Feb 13, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?